Amana Dishwasher Not Filling With Water: 6 Ways To Fix It

Has your Amana dishwasher suddenly stopped filling with water, leaving you with dirty dishes and frustrated?

This common issue can disrupt your daily routine and make it difficult to maintain a clean kitchen.

Fortunately, identifying the root cause of your dishwasher’s lack of water is not complex.

Several factors could lead to an Amana dishwasher not filling with water.

These issues may include a lack of incoming water supply, a malfunctioning float switch, or other underlying causes, such as a clogged or defective water inlet valve.

By understanding these potential causes, you will be better equipped to find a solution to get your dishwasher back to its normal functioning.

In the following sections of the article, we will explore various troubleshooting methods and fixes for an Amana dishwasher not filling with water.

With this information, you can confidently address the issue and restore your dishwasher’s efficiency, ensuring spotless dishes and a smoother household routine.

Why Is Your Amana Dishwasher Not Filling with Water?

There can be several reasons your Amana dishwasher is not filling with water.

Some of the most common causes are related to the water inlet valve, wash cycle, water supply, and water temperature.

Let’s explore each of these factors in detail.

1. Water Inlet Valve

Your Amana dishwasher might not fill with water if its water inlet valve is clogged due to dust and debris.

Make sure to clean the water inlet valve regularly to ensure proper flow of water into the machine.

If the valve is clean, but the dishwasher is still not filling, it might be time to replace it.

Remember to seek expert help for valve replacement services.

2. Wash Cycle

A power interruption or an open door during the current wash cycle can cause your Amana dishwasher to pause, making it unable to fill with water.

In such cases, ensure the power supply is stable, and the door is closed properly before resuming the wash cycle.

3. Water Supply

Water supply problems can also lead to your Amana dishwasher not filling properly.

Calcium deposits and sediments can accumulate in the water supply valve or in the small filter screen inside the water inlet valve.

If the dishwasher is not filling, shut off the water supply and inspect the valve and filter screen for any clogs.

Clean the valve and screen if needed so that water can flow without any obstruction.

4. Water Heater and Temperature

The water heater in your dishwasher plays a crucial role in providing the right water temperature for effective cleaning.

If the water heater is malfunctioning, it may affect the filling process of your dishwasher.

Ensure your dishwasher’s water heater works correctly and provides water at the optimal temperature for cleaning your dishes.

5. Water Pressure

 Low water pressure in your home’s water supply system can also result in your Amana dishwasher not filling adequately.

Check your home’s water pressure and make any necessary adjustments to ensure it meets the minimum requirements for your dishwasher.

By addressing the factors mentioned above, you should be able to identify and resolve the issue of your Amana dishwasher not filling with water.

Proper maintenance of your dishwasher’s components and regular checks on its water supply can help prevent this problem and ensure your appliance operates optimally.

How to Fix an Amana Dishwasher Not Filling with Water

Here are the best ways to fix an Amana dishwasher not filling with water.

1. Check the Washing Cycle

First, ensure that your Amana dishwasher’s washing cycle is not paused.

An accidentally paused cycle may prevent water from filling the dishwasher.

If the cycle is paused, simply resume and see if the issue is resolved.

2. Inspect the Water Inlet Hoses and Valve

Examine the water inlet hoses connected to your dishwasher for any kinks or clogs.

Straighten the hoses if necessary and ensure there is no obstruction in the water flow.

Additionally, check the water inlet valve for any blockages or issues.

If the valve is faulty, it may need to be replaced.

Sometimes, you may need to clean the filter screens on the water inlet valve with white vinegar and a soft brush.

3. Test the Float Switch

The float switch shuts off the water inlet valve when the dishwasher is overfilled.

However, if the float switch is defective, it can prevent your Amana dishwasher from filling with water.

Locate the float switch inside your dishwasher tub and test its functionality.

If it’s faulty, consider replacing it.

4. Examine the Control Board and Electronic Control

Inspect your dishwasher’s control board and electronic control for any visible damage or burn marks.

If either of these components is faulty, they may need to be replaced.

5. Clean the Filters and Spray Arms

Dirty filters and clogged spray arms can impact the water flow in your dishwasher.

Remove the filters and spray arms, cleaning them thoroughly to remove any bits of food or other debris.

Refer to your dishwasher’s manual for step-by-step instructions on accessing and cleaning these components.

6. Verify the Power Supply

Lastly, double-check that your dishwasher is connected to a working power outlet.

An issue with the power supply or outlet may affect the functioning of your dishwasher’s water-filling mechanism, among other functions.

Remember, it’s essential to refer to your Amana dishwasher manual for instructions specific to your model, and consult a professional technician if you are unsure of how to perform any of these steps.

How to Prevent the Problem

Here are some steps you can take to prevent your Amana dishwasher from experiencing issues with not filling with water.

1. Regularly check the water supply

Ensure that your dishwasher is connected to a water supply and the tap is turned on.

This will help in maintaining a consistent flow of water into the appliance.

It’s advisable to check the water supply from time to time to avoid any interruption during the washing cycle.

2. Maintain the float switch

The float switch shuts off the water inlet valve when the dishwasher is overfilling.

Inspect and clean the float switch regularly to ensure it functions properly.

A faulty float switch can prevent your dishwasher from filling with water, so keeping it in good working condition is essential.

3. Position the drain hose correctly

Ensure that the drain hose is positioned at least 20 inches off the ground.

This height is necessary for the dishwasher to fill and drain properly.

Keep an eye on the drain hose’s position to prevent any future issues.

4. Inspect the water inlet valve

The water inlet valve regulates the flow of water into the dishwasher.

If the valve is faulty, it can prevent the dishwasher from filling with water.

Periodically inspect the water inlet valve for any signs of damage or wear and tear and replace it if necessary.

5. Avoid power interruptions

Power interruptions can cause the dishwasher’s cycle to pause, preventing it from filling with water.

Make sure your dishwasher is connected to a reliable power source to minimize the risk of power interruptions.

By following these tips and regularly maintaining your Amana dishwasher, you can help prevent the issue of it not filling with water.

Stay vigilant and take care of your appliance to ensure it remains in optimal working condition.