Amana Washer Not Filling with Water: 6 Ways To Fix It Now

Having an Amana washer not filling with water can be a frustrating issue.

You may wonder what could be causing this problem and how to fix it.

In this article, we will explore some common reasons why an Amana washing machine may not be filling with water and offer possible solutions to get your washer up and running again.

One reason your Amana washer may not be filling with water could be a clogged or faulty inlet valve.

Issues like a broken pressure switch, a faulty control board, low water pressure, or a kinked/clogged water supply hose can prevent your Amana washer from filling as well.

As you continue reading, we will discuss in detail how to identify these issues and troubleshoot your Amana washer to resolve the problem efficiently.

With this knowledge, you will be able to confidently address the issue when your Amana washer does not fill with water.

Why is your Amana Washer not Filling with Water?

There are several reasons why your Amana washing machine may not fill with water.

Identifying the cause can help you troubleshoot and fix the problem.

1. Clogged or faulty inlet valve

The water inlet valve opens to allow water to enter the washing machine.

If it’s clogged with debris or faulty, the washer may fill slowly or not fill at all.

Ensure that the water inlet valve is clean and functioning correctly to resolve this issue.

2. Malfunctioning water level sensor

A water level sensor monitors the water in your washer and stops the water inlet valve when the desired level is reached.

If it’s malfunctioning, it can prevent water from filling the washer.

To fix this, inspect and replace the water level sensor if necessary.

3. Broken pressure switch

The pressure switch communicates with the control board and water inlet valve to control the water flow.

If the pressure switch is broken, the washer might not fill properly.

Check the pressure switch and replace it if needed.

4. Faulty control board

The control board coordinates the washer’s various components, including the water inlet valve and pressure switch.

If the faulty control board is found, incorrect signals can be sent to the components, preventing water from filling the washer.

Inspect the control board and consider replacing it if it’s not functioning correctly.

5. Low water pressure

Amana washers require sufficient water pressure to function properly.

The washer might not fill with water if the water pressure is too low.

Check your home’s water pressure and ensure it’s within the required range for your washer.

Adjust the water pressure or consult a professional plumber for assistance if needed.

6. Kinked or clogged water supply hose

The water supply hose connects to the washer and transports water into the machine.

If the hose is kinked or clogged, it can restrict water flow, preventing the washer from filling.

Inspect the hose and straighten out any kinks, clean the debris, or replace the hose if necessary to resolve the issue.

How to Fix an Amana Washer Not Filling with Water

If your Amana washer is not filling with water, there could be several reasons behind the issue.

Here are some solutions to help you fix the problem:

1. Check Water Flow and Pressure

Ensure that your washing machine gets a continuous water supply.

Examine the water flow and pressure by turning on the faucet connected to your washer.

If the water flow is weak, a potential cause might be a clogged inlet screen in the water hoses.

Clean the filter screen and retest the flow.

2. Clean Water Inlet Hose

Over time, dirt can accumulate in the water inlet hose, preventing the Amana washer from filling.

Detach the hose from the washer and clean the filter screen.

Rinse it with water and reconnect the hose to the machine.

3. Examine the Water Inlet Valve

The water inlet valve allows water to enter the washing machine.

It requires sufficient water pressure to function correctly.

If the valve is faulty or has visible damage, you might need to replace it.

4. Investigate the Washer Timer

The washer timer controls different cycles, including the spin cycle and water inlet valves.

The machine may not fill with water if it’s not working correctly.

Consult your washer’s tech sheet and run a diagnostic mode to check if the timer is functioning properly.

5. Assess the Lid Switch

The lid switch prevents the washer from running if the lid is partially or fully open.

Make sure the lid is completely closed and that the switch is working correctly.

If needed, replace the lid switch.

6. Examine the Control Board and Wiring

The control board and wiring can also affect the washer’s filling process.

Check for any loose wires or connections in the electronic control system.

Additionally, inspect the power cord and circuit breaker to confirm they are functioning correctly.

By addressing these potential issues, you should be able to fix your Amana washer’s problem of not filling with water.

If the issue persists, consider contacting a professional technician for further assistance.

How to Prevent the Problem

To prevent your Amana washer from not filling with water, follow these guidelines to ensure smooth operation and avoid common issues.

1. Maintain water supply and pressure

Ensure your home’s water supply is consistent and has adequate pressure.

This will help the machine receive the desired amount of water for each cycle.

2. Open water supply faucets

Ensure that the faucets connected to the washer’s water supply hoses are fully open, allowing water to flow freely into the machine.

3. Regularly check and clean inlet hoses

Inspect the water inlet hoses for any kinks or debris that could restrict the water flow.

Cleaning the inlet hoses periodically will keep them clean and prevent clogging.

4. Clean the filters

The filters in the water valve might become clogged with debris or sediment over time.

Regularly clean these filters to maintain a steady water flow into the washer.

5. Monitor the washer lid and lid switch

Ensure that the washer’s lid is fully closed and the lid switch is functioning correctly.

This will prevent the machine from not filling up due to a safety mechanism that is triggered when the lid is not securely closed.

6. Regularly inspect and clean water level sensors

The water level sensors, such as the pressure switch, help manage the amount of water in the washer.

Keep these components clean and debris-free to ensure accurate water level readings.

By following these preventive measures, you can reduce the chances of experiencing issues with your Amana washer not filling with water.

Regular maintenance and inspections can help prolong the life of your appliance and ensure it operates efficiently.

5/5 - (8 votes) Protection Status
error: Content is protected !!