Maytag Dryer Not Spinning: 5 Easy Ways To Fix It Now

A Maytag dryer not spinning can be frustrating, leaving you with damp clothes and a disrupted laundry routine.

While diagnosing and fixing the problem may seem daunting, rest assured that it is possible.

There are several reasons why your dryer might refuse to spin, ranging from simple to more complex issues.

In this article, you’ll be guided through the possible causes of a non-spinning Maytag dryer, helping you identify the root of the problem and determine the course of action needed to get your dryer back on track.

With a confident approach and some knowledge, you’ll have your dryer spinning again in no time.

Armed with the right information, you can assess your dryer’s issues and decide whether to tackle the problem yourself or call a professional to get your laundry routine back up and running smoothly.

Let’s delve into the world of Maytag dryers and uncover the reasons behind their spinning issues.

Why Is Your Maytag Dryer Not Spinning?

One common symptom of a Maytag dryer not spinning is a humming noise, which wet clothes may accompany at the end of the cycle.

This can be frustrating and may seem like a complex problem to solve.

In this section, we will discuss a few reasons your Maytag dryer might not be spinning and provide possible solutions.

1. Tripped Circuit Breaker or Blown Fuse

Sometimes, the dryer might not spin because there is not enough power to operate.

Check your home’s circuit breaker to ensure it hasn’t tripped, and if it has, reset it.

Inspecting the fuses in the dryer’s power supply is essential to ensure they have not blown.

If you find a blown fuse, replacing it will likely fix the issue.

2. Control Lock

Some Maytag dryers have a control lock feature to prevent unintended operation.

If this feature is activated, the dryer will not spin.

To disable the control lock, press and hold the Cycle Signal button for three seconds.

This will unlock the controls, and your dryer should start spinning when the appropriate settings are selected.

3. Broken Drive Belt

A broken drive belt can prevent your Maytag dryer from spinning.

The drive belt connects the dryer’s drum to the motor, allowing it to rotate.

A worn-out or damaged belt might result in excessive vibration, loud noise, or a burning smell coming from the machine.

In this case, you must replace the belt to fix the problem.

4. Faulty Door Switch

The door switch is a safety feature that prevents the dryer from operating when the door is open.

If the switch is faulty, the dryer will not spin, even if the door is closed.

To determine if the door switch is the problem, you can either test it for continuity using a multimeter or visually inspect it for any damage.

If it’s indeed the issue, the switch must be replaced.

5. Motor Problems

If all the above suggestions do not resolve the spinning issue, there may be a problem with the dryer’s motor.

The motor could be overheating or experiencing other issues that prevent it from functioning properly.

In this case, it is advisable to consult a professional technician or contact Maytag directly to address the issue.

By addressing these potential problems, you can help diagnose and fix the issue causing your Maytag dryer not to spin, ensuring your laundry day is back on track as soon as possible.

How to Fix a Maytag Dryer Not Spinning

There could be various reasons for a Maytag dryer not spinning.

Here are a few possible solutions to fix this issue:

1. Check the Power Source

First, double-check that your dryer is plugged in properly and that the power cord is in good condition.

Ensure that the plug is fully connected to the outlet.

Also, electric dryers should have 2 circuit breakers or fuses.

If one is tripped or blown, the dryer might not perform both heating and spinning operations.

2. Gas dryers, however, use only one circuit

Inspect the Control Panel Functions

Ensure the control panel is functioning correctly and that no child lock is enabled.

Hold the cancel button for five seconds to turn off the child lock permanently.

3. Examine the Dryer Belt

A broken or damaged drive belt can cause your Maytag dryer not to spin.

Inspect the drive belt for visible signs of damage or excessive wear.

If you find any issues, consider replacing the belt.

4. Check the Idler Pulley and Drum Roller

A damaged or worn idler pulley or drum roller might be responsible for the dryer drum not spinning.

Inspect these parts for visible damage or wear and replace them if necessary.

5. Assess the Drive Motor

A malfunctioning drive motor can lead to spinning issues with your Maytag dryer.

Listen for any unusual noises coming from the motor and check for any signs of physical damage.

If you find any problems, it may be time to replace the drive motor.

Look for Signs of Improper Installation

An improperly installed power cord or control panel could be a reason for your Maytag dryer not spinning.

Ensure that all connections are secure and that the power cord is installed according to the manufacturer’s instructions.

Remember to always unplug your dryer before attempting any repairs.

If you’re unsure about any of these steps or don’t feel comfortable performing them yourself, it’s best to consult a professional appliance repair technician.

How to Prevent the Problem

In order to prevent your Maytag dryer from not spinning in the future, several preventative measures can be taken.

Following these steps will ensure that your dryer runs effectively and efficiently for a long time.

1. Check the Control Panel

Keep track of your dryer’s control panel, making sure that all switches and buttons function properly.

If you notice any issues, address them promptly to avoid further complications.

2. Inspect the Switch for Continuity

Regularly inspect the door switch for continuity, as it can affect the spinning of your dryer.

If there are any signs of wear, replace the switch.

3. Examine the Drum Support Rollers

Drum support rollers help the drum to spin smoothly.

Check these rollers for any signs of wear and replace them if necessary.

4. Maintain the Rear Drum Bearing

The rear drum bearing supports the drum and ensures it spins smoothly.

If you hear loud noises or scraping sounds from your dryer, it could indicate a worn-out rear drum bearing that needs replacement.

5. Check the Roller Axle

The roller axle helps the drum support rollers to function.

Examine it for any signs of wear and replace it if needed.

6. Adhere to Safety Precautions

Always follow safety precautions when using and maintaining your dryer.

Ensure that safety devices and features, like child lock mechanisms, are working properly to prevent accidents and operational issues.

7. Replace a Broken Dryer Drum Belt

A broken drive belt not only causes your dryer not to spin but can also lead to excessive vibration, loud noise or a burned smell.

Regularly inspect the belt for wear and replace it when it shows signs of wear.

Ensure Proper Power Supply

For electric dryers, ensure they have two functional circuit breakers or fuses that power the heating element and motor.

For gas dryers, only one is required.

Keep an eye out for humming or thumping sounds indicating power supply issues.

By regularly inspecting and maintaining the different components of your Maytag dryer, you can prevent it from not spinning and ensure its longevity.

5/5 - (7 votes)
DMCA.com Protection Status
error: Content is protected !!