Bosch Dryer Not Drying? 6 Fast & Easy Ways To Fix It Now

Have you noticed we’re more dependable on home laundry appliances than ever before? You no longer need to endure the hassles of drying your clothes. Who would give up that luxury?

However, unfortunately even high-end dryers can develop performance issues over time. That’s why your Bosch Dryer not drying is an issue that could appear after using it for a while. The good news, though, is the Bosch dryer issues could be easily repaired without the help of a professional.

So if your Bosch Dryer is not drying, skim through this list of reasons why these issues appear and the DYI fixes we’ve prepared. 

If you act quickly, you won’t face any major breakdowns or dryer fires, which could lead to ignoring the tumble dryer issues.

In a hurry?
If your Bosch dryer is not drying, it could be due to a clogged lint filter, a blocked vent, or a malfunctioning heating element. Check for blockages and clean the lint filter to fix the issue. If the problem persists, contact a professional technician for assistance.

Why is your Bosch Dryer not Drying?

The Bosch dryer allows you to dry clothes with a button. However, fixing is not that easy when the dryer is not drying, the drying takes too long, or the dryer won’t heat. 

If the dryer fails to dry your clothes or leaves your clothes damp, performing a reset usually helps. However, in some cases, you might even need to replace the fuse or clean the filters and sensors. 

Before jumping to any conclusions, you have to determine what is causing the dryer to stop working correctly. We’ve listed the most common reasons why the Borsch dryer is not drying.

1. Overload

Even though all modern dryers have a large capacity, they have limits regarding the load. Squeezing items into every last bit of space can create multiple issues. The biggest is there won’t be enough room in the dryer drum for the hot air to circulate through the load.

It won’t take your Bosch dryer multiple cycles to dry a considerable load, but it can even damage other components. The weight strains a drum bearing, potentially leading to the breakdown. 

2. The clothes are too wet.

Your clothes should be spun dry by the washing machine before you put them in the dryer. So if the washing mashing is not spinning adequately, the clothes might be too wet for the dryer to cope with

As a result, you’ll get damp clothes at the end of the cycle

3. Dirty lint screen 

Since unrestricted airflow is a key to dryer efficiency, you should also pay attention to the lint screen and your dryer exhaust system. Any debris on the lint filter may cause your Bosch tumble dryer not to dry clothes properly.

4. Clogged dryer vents

Dryer vent tubes serve as a pathway for the hot air to escape. So if you don’t clean your lint screen too often, the lint could make it through to the dryer vents and build up there. 

If the lint makes it through to the dryer vents, it could restrict the airflow and lead to dangerously high temperatures.

Your dryer may seem to be working fine and complete the cycle, but the clothes will still be damp when you open it.

This lint buildup could ignite and create a dryer fire if left unchecked. Moreover, it can shut the thermal fuse and trip the thermal fuse.

5. Brown thermal fuse

The thermal fuse is a safety mechanism that fails when the unit gets too hot inside. It is found in all modern dryers to prevent fires and other issues. 

If the thermal fuse pops up, your dryer either won’t dry anymore or won’t turn on at all.

6. Dirty moisture sensor

Sometimes, the Bosch dryer could stop mid-cycle because of the blown thermal fuse or overheating caused by dirty filters. However, dirty moisture sensors could also cause troubles during the drying process.

The purpose of the moisture sensor is to detect when clothes are dry. The sensor shuts off the dryer to preserve energy if no moisture is detected. 

Therefore, dirty moisture sensors could give false readings and cause the dryer to stop in the middle of the cycle, leaving your clothes wet.

7. Faulty heating element

Once you troubleshoot your Bosch dryer and conclude that none of those mentioned above reasons causes the issue, chances are you’re dealing with a faulty heating element

This is the part that heats the air inside your dryer. Unfortunately, it could wear off or fail over time. So, you will need to either repair or replace it.

How to fix a Bosch Dryer Not Drying

Finding a pile of damp clothes after the drying cycle will come as a surprise. Whether the dryer takes too long or the cycle won’t start, the problem is often close to the surface.

After troubleshooting the Bosch dryer not drying issue, you should determine how to fix it

We have gathered them already, so you don’t have to look around. Most require you to clean the dryer part. But if you don’t want to come this far and face any issues with your dryer, you should clean it more often.

1. Check your washing machine.

When the washing machine leaves your clothes soaking wet, the Bosch dryer not drying is not the dryer’s problem

Correspondingly, you must check several things on your washing machine to determine why it doesn’t dry your clothes (the overload could also cause it).

2. Clean the lint screen

To keep the lint screen in a good state, manufacturers recommend you remove the lint screen and wipe away any trapped material after every load. It will prevent the debris from building up and drying problems from appearing. 

You must pull out the filter and wipe away the lint with the paper towel over the trash can. Then reinstall the lint screen and test your Bosch dryer again to check whether it’s working effectively.

3. Clean the dryer vent 

The dryer vent is the second essential appliance you must keep an eye on. The best way to clean it is at least twice a year to maintain its performance and prevent fires. 

Besides, you could purchase a dryer vent cleaning kit and use it along with the vacuum cleaner hose extension. It will help you remove as much lint from your vents as possible. 

Finally, you can always resort to the dryer vent cleaning service for the best results.

4. Check the thermal fuse

It would help if you had an electrical multimeter to check whether the thermal fuse works. Locate the thermal fuse inside the cabinet and use the multimeter to check for continuity. If you find none, you’ll likely need to replace this part. 

Note that blowing a fuse usually indicates restricted airflow. So make sure to follow the safety requirements when checking it.

5. Clean moisture sensors

Since all Bosch dryers have a steep moisture sensorit is easy to find around the door area. It is best to use a sponge to clean it, a coarse sponge in particular. This kind of sponge is most likely to remove dirt quickly and easily. 

Besides, it is essential to note that you should never use steel wool or abrasives. They could damage the moisture sensor and force you to replace this part.

6. Fix the heating element

The heating element is usually the last thing you check when the Bosch dryer is not drying, not only because it fails rarely but because it is the hardest to fix. 

Correspondingly we recommend leaving the troubleshooting or repair to the professionals, especially with high-end models like Bosch. The last thing you need is to make things worse.

4.9/5 - (7 votes) Protection Status
error: Content is protected !!