Have your Electrolux clothes dryer suddenly stopped working and displayed an E64 code? If so, you know how frustrating it can be to try and figure out what this code means and how to fix it.
In this article, we will explore the Electrolux electric dryer error E64 code in detail, including its common causes and practical solutions to fix it. We recognize the significance of having a dependable and efficient dryer, and we want to assist you in getting back to completing your laundry without incident.
Don’t panic if you’re currently dealing with an E64 code on your Electrolux electric dryer. We have all the information and instructions to resolve this issue and get your dryer back up and running. Continue reading to learn more.
What Causes Electrolux Dryer E64 Code?
The E64 error code on Electrolux dryers typically indicates a problem with the heating system.
Specifically, it means that the dryer’s heater circuit has experienced an open circuit or a fault with the heater element (i.e., the heater coils), thermal fuse, or temperature sensor.
Here are some of the most common causes of the Electrolux dryer error E64 code:
1. Faulty Heating Element
A faulty heating element is one of the most common causes of the dryer error E64 code. The heater coils may become damaged over time or due to excessive use, preventing the dryer from heating up properly.
Using a multimeter to measure continuity, determine if the heating element is malfunctioning. The heating element should be changed if there is no continuity.
2. Tripped Circuit Breaker
Another common cause of the E64 error code is a tripped circuit breaker. If the circuit breaker is tripped, the dryer (or heater circuit) will not receive the necessary power to heat up.
To check if the circuit breaker is the issue, try resetting it and see if the dryer begins functioning properly.
3. Clogged Vent
A clogged vent can also trigger the E64 error code. A clogged vent can prevent the dryer from venting properly, which can cause overheating and damage to the heating element.
You can clean the vent and ensure proper ventilation to resolve this issue.
4. Damaged Power Cord
A damaged power cord can also cause the E64 error code. If the power cord is damaged, it may not deliver the necessary power to the dryer, preventing it from heating up properly.
To check if the power cord is the issue, inspect it for any visible signs of damage, such as frayed or exposed wires.
5. Damaged Outlet
Similarly, a damaged outlet can also cause the E64 error code. If the outlet is damaged, it may not deliver the necessary power to the dryer, preventing it from heating up properly.
To check if the outlet is the issue, you can try plugging in another appliance to see if it functions properly.
6. Loose Wiring
Loose wiring can also cause the E64 error code. When major appliances (like the Electrolux electric dryer) wire harnesses are loose, they may not deliver the necessary power to the dryer, preventing it from heating up properly.
You can inspect the wiring connections and tighten any loose wires to check if the wiring is the issue.
7. Blown Thermal Fuse
Finally, a blown thermal fuse can also cause the E64 error code. The thermal fuse protects the dryer from overheating; if blown, the dryer will not heat up properly.
You can use a multimeter for continuity to check if the thermal fuse is the issue. If there is no continuity, the thermal fuse should be replaced.
How to Fix Electrolux Dryer E64 Code
Fixing the E64 error code on an Electrolux dryer involves dryer troubleshooting and replacing faulty components. Here are the steps to follow:
1. Check the Connection between the Dryer and the Power source
Verify that the power is connected to the dryer. If the power is not connected, connect it to the dryer and turn it on.
Check the power cord for breaks or damage if the dryer still does not start. Check the outlet for damage if the power cable is not the issue. If the outlet is not the problem, check the wiring to the dryer. If the wiring is not the problem, check the dryer’s fuse.
2. Clean the Lint Screen.
Remove the lint screen by turning it counterclockwise.
Clean the screen with a vacuum cleaner and water, reinstall it, and turn it clockwise.
3. Check the Dryer vent for Blockages.
You begin by removing the dryer cover and the dryer vent hose. This makes locating and removing debris or lint blocking the dryer vent easier.
Also, remember to inspect the dryer vent for any blockages.
After cleaning up the dryer vent, reconnect the hose and reinstall the cover.
4. Clean the Interior of the dryer.
Open the dryer door and remove any items inside the dryer that may have fallen onto the heating element. Remove the lint filter and clean it with a vacuum cleaner.
If the heating element is dirty, use a brush to clean it. If the heater unit is not dirty, replace it with a new one.
Clean the interior of the dryer drum with a vacuum cleaner. Clean the exterior of the dryer with a hose and a scrub brush.
5. Inspect the Heating element.
Look for any burnt-out light bulbs or electrical cords. Check the heating element for any scorching or broken wires.
If there are any damaged or scorching wires, replace the heating element.
6. Check for loose wiring.
If the wiring to the coils is defective, the easiest way to test it is to remove the coils and check the wiring.
If the wiring to the motor is defective, the dryer may not be able to start. To test the motor, you will need to remove the dryer cover.
If the wiring is not defective, but the “E64” error code is still being displayed, it may be because the thermal fuse has been blown.
To test the thermal fuse, you must remove the cover and check the fuse. The “E64” error code may be displayed if the fuse is blown.
7. Replace any Damaged parts.
If any of the components of the Electrolux dryer are damaged, they may need to be replaced to resolve the E64 error code.
Some components that may need to be replaced include the heating element, power cord, outlet, wiring, or thermal fuse. It is essential to inspect each component and address any issues found carefully.
It is important to note that if you are uncomfortable troubleshooting or repairing your Electrolux dryer, you should contact an appliance technician (or highly-rated, verified experts) for your appliance repair.
Preventing Electrolux Dryer E64 Error Code
To prevent the E64 error code on an Electrolux dryer, you can take the following steps:
1. Regularly clean the Lint filter
Cleaning the lint filter is one of the essential steps in preventing the E64 code.
The lint filter (or lint trap) traps lint and debris from clothes during the drying cycle, but it needs to be cleaned regularly to avoid becoming clogged and restricting airflow. This can cause the dryer to overheat and trigger the E64 code.
To prevent this from happening, clean the lint filter after each cycle or at least once a week if you use the dryer frequently. Remove any lint or debris by wiping it off or vacuuming it with a soft brush attachment.
If the filter is damaged, replace it with a new one.
2. Check the Dryer Vent Regularly.
The dryer vent is the duct that transports hot and wet air from the dryer to the outside. A blocked vent might cause the dryer to overheat, resulting in the E64 error code.
To prevent this from happening, check the dryer vent regularly and clean it if necessary. Remove any lint, debris, or other obstructions blocking the vent.
To thoroughly clean the vent, use a vent brush or a vacuum cleaner with a long hose. If the vent is damaged or deteriorating, replace it with a new one.
3. Avoid Overloading the Dryer.
Overloading the dryer can cause it to overheat and trigger the E64 code. Always follow the manufacturer’s instructions for load size and avoid stuffing too many clothes into the dryer.
Overloading the dryer causes the E64 code and can damage the heating element and other components, leading to costly repairs.
4. Inspect the Heating Element.
The heating element is part of the dryer that produces heat to dry clothes. Over time, the heating element may become damaged or worn out, which can cause the dryer to overheat and trigger the E64 code.
To prevent this from happening, inspect the heating element regularly for signs of damage or wear. If you notice any cracks, scorch marks, or other signs of damage, replace the heating element with a new one.
5. Check the Wiring
Inspect the wiring to ensure it’s properly connected and not damaged. Loose or damaged wiring can cause the dryer to malfunction and trigger the E64 code.
Check the power cord, the outlet, and the wiring inside the dryer for any signs of damage or wear. Ensure the connections are tight and secure, and replace any damaged wiring.
6. Keep the Dryer in a Well-Ventilated Area.
Proper ventilation is essential for preventing the E64 code. If the dryer is placed in a small, enclosed space or surrounded by clutter, it can’t correctly vent hot, moist air, causing it to overheat and trigger the E64 code.
To avoid this, ensure the dryer is in a well-ventilated area with enough room. Anything obstructing airflow should not be stacked on the dryer or stored near it.
Following these steps, you can avoid the E64 error and keep your Electrolux dryer functioning well.
Routine maintenance and inspections can detect possible problems before they become big ones, saving you time and money in the long term.
Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance. He is well-versed in the latest technologies and techniques and is always up-to-date on the latest industry standards.
