Maytag Washer F5 Error Code: Causes & 11 Ways To Fix It Now

Has your Maytag Model of Washer suddenly stopped working and started displaying an F5 error code on the screen? If so, don’t panic! While it can be frustrating to encounter an unexpected issue with your Maytag washer, there are ways to diagnose and fix the problem.

This article will explore the Maytag washer F5 error code, its possible causes, and the most effective ways to troubleshoot and repair it. By understanding the underlying issues that trigger this error code, you can take the necessary steps to get your washer back in good working condition.

So, if you’re curious about what the F5 error code means, how to identify its root causes, and what you can do to solve the problem, keep reading. We’re here to help you overcome this issue and ensure your Maytag washer runs smoothly again.

Maytag Washer F5 Error Code
The main cause of the Maytag Washer F5 Error Code is a malfunctioning or faulty door lock or switch (locking mechanism). This error occurs when the washer cannot lock the door. It can be prevented by regularly maintaining the washer, checking the door lock, electrical outlet (power outlet), and water inlet hoses, and loading the washer properly.

Causes of Maytag Washer F5 Error Code

The Maytag Washer F5 code is usually caused by a faulty door lock or switch, which prevents washing machines from starting or continuing the cycle. However, there can be other underlying causes that trigger this code. Here are some of the possible reasons:

1. Faulty Door Lock

If the Maytag washer’s door lock is malfunctioning, it can trigger the F5 code. This could be due to a faulty door latch or a malfunctioning door lock switch. The door latch may be broken or misaligned, preventing the Maytag washer from correctly recognizing that the door is closed.

The door lock switch may also be faulty, preventing the Maytag washer from locking the door and starting a cycle. You may need to replace the door latch or lock switch to fix this issue. This is a relatively straightforward repair that can be done with essential tools.

2. Control Board Malfunction

A problem with the Maytag washer’s control board (or control panel) can also cause the F5 code. This could be due to a software issue or a malfunctioning circuit board.

Sometimes, the control board may need to get reset by unplugging the Maytag washer and plugging the washer back in after a few minutes. If this does not work, the control board may need to be replaced. This is a more complex repair that a qualified technician should do.

3. Electrical Issues

Electrical problems, such as a faulty power cord or a damaged power outlet, can cause the F5 Maytag washer code. If the power cord is damaged, it may need to be replaced. If the outlet is damaged or not functioning correctly, an electrician may need to repair or replace it.

In some cases, the Maytag washer’s circuit breaker may also need to be reset.

It’s important to note that the specific causes of the F5 Maytag washer code vary by model. If you’re experiencing this error code, it’s recommended to consult the instruction manual or contact an appliance technician for your appliance repair.

4. Motor Issues

When it comes to Maytag washer error codes, the f5 error code can indicate a problem with the washer motor. This can be frustrating for anyone trying to do their laundry, but luckily it’s not uncommon and can be fixed.

If the motor is having difficulty starting or it’s completely burned out, it can’t do its job properly and will trigger the error code.

While it’s important to address this issue promptly, it’s equally important to have a professional assess and repair the problem to avoid further damage or safety hazards.

5. Loose Connections

When it comes to your reliable washing machine, loose wiring and water connections can cause serious headaches. Not only can it throw off the electrical supply, but it can also trigger the infamous f5 error code.

Connections are essential to proper operation, so it’s important to make sure they’re secure and functioning properly. If you notice any suspicious behavior or the error code is displayed, it’s time to call a professional.

6. Damaged Door Strike

Issues with your Maytag washer’s door strike can lead to a frustrating f5 error code. Even the smallest misalignment or malfunction in the strike can cause major problems for your washer’s ability to latch properly.

Door strikes are essential for keeping the load washer door shut and preventing water from spilling out, so it’s important to address this issue promptly.

Fixing this issue is crucial to ensure smooth and efficient performance of your machine. Don’t let a damaged door strike hinder your Maytag washer’s efficiency – take action today to ensure it’s working optimally.

7. Broken Door Latch

A faulty door latch is a common culprit when it comes to the Maytag washer f5 error code. This error washer code signals a problem with the front load washer door lock mechanism and prevents the load washer from starting.

Fortunately, this issue can often be resolved by replacing the faulty loading washing machine lid latch. While this may require some technical expertise, it’s a relatively simple fix that doesn’t require replacing the entire washer.

It’s important to address a broken door lid latch as soon as possible to avoid further damage and ensure the longevity of your Maytag modern washing machine.

8. Damaged Cable Connection

When your Maytag washer displays the f5 error code, it’s a clear indicator that the cable connection between the control board and door lock is compromised.

This kind of damage can occur due to various reasons such as wear and tear, accidents, or power surges.

The consequences of a damaged cable can be frustrating, leaving you unable to operate your washer effectively. However, there’s no need to worry as this issue is fixable.

9. Faulty Door Switch

If your Maytag washer is displaying the f5 error code, there’s a good chance that a faulty door switch is to blame. This issue can be quite frustrating, as it can prevent the washer from functioning altogether.

A door switch assembly is responsible for detecting the opening and closing of the washer door. If it malfunctions, it can prevent the washer from starting its washing cycle properly.

Fortunately, there are steps you can take to address the problem, such as checking the door latch and replacing the faulty switch assembly if necessary.

How to Fix Maytag Washer F5 Code

If you’re experiencing the Maytag Washer F5 error code, there are several steps you can take to fix the issue. Here are some potential solutions:

1. Call an Authorized Service Provider

This is the recommended option if you’re not comfortable with DIY repairs. The service provider can diagnose the issue and fix it for you.

2. Unplug the Maytag Washer for 30 Seconds and Plug it Back In

This simple fix may work if a minor glitch causes the issue.

To do this, turn off the water supply to the washer, open the front panel of the Maytag washer, find the outlet that is labeled “WASHER” and unplug it, close the front panel of the washer, turn on the water supply to the washer, plug the outlet labeled “WASHER” back into the wall (or power supply), wait 30 seconds, and then check the error code.

3. Press and Hold on to the START/PAUSE Button on the Washer for 5 Seconds

If the error code persists, try this fix. Open the front cover. Examine the inlet and outlet valves for water. If nothing is blocking the water flow, clean them with a plunger.

Remove them with a Phillips head screwdriver if they block the water flow.

Inspect the power cord. Ensure that it is properly plugged in.

Inspect the Maytag Washer F5 error code sensor. If it is not working properly, replace it.

Inspect the Maytag Washer F5 error code control board. If it is not working properly, replace it.

4. Inspect the Electrical Outlet to Ensure it is Functional

If the error code persists, check the electrical outlet to ensure it works properly.

Turn off the power by turning off the breaker at the electrical box.

Next, use a voltmeter to test the outlet to see if it works. There should be 12 volts at the outlet when it is working. If the outlet is not working, replace the outlet.

By following the steps above, you should be able to diagnose and fix the Maytag Washer F5 error code.

5. Inspect the Control Board

As a homeowner, encountering error codes on your Maytag washer can be frustrating, particularly the f5 code. This error code typically indicates a problem with the control board, which controls various functions of the washer.

In order to resolve the issue, you may need to inspect the board for any signs of damage or wear and tear.

This might include checking for loose connections or burnt-out components, among other things. If you identify any issues, you’ll need to replace the control board with a new one.

To do this, firstly, remove the screws that secure the control board in place. Secondly, disconnect the wiring harnesses from the old board and connect them to the new one. Lastly, reinstall the screws to reattach the board.

While this process can be intimidating, taking the time to carefully inspect the board and follow the proper steps will ensure that your Maytag washer is back up and running smoothly in no time.

6. Verify the Motor

As a professional in the field of washer repair, it is important to be well-versed in the steps that are necessary to verify the motor to avoid the Maytag washer f5 error code from occurring.

One of the first steps is to ensure that the washer is unplugged from the electrical outlet before proceeding. From there, it is necessary to remove the rear panel of the washer and check for any visible signs of damage to the motor or wiring.

Once the motor has been visually inspected, a multimeter can be used to check for continuity in the motor circuit. Ensuring that the motor is functioning properly is crucial to avoiding the frustrating and time-consuming experience of dealing with the f5 error code.

7. Check for Loose or Disconnected Wires

A common problem that occurs in a Maytag washer is the f5 error code, which is usually caused by loose or disconnected wires. Checking for these issues doesn’t have to be a daunting task with these simple steps.

First, unplug the machine and remove the back panel. Then, visually inspect all the wires to see if any are disconnected or loose.

Next, firmly reattach any found wires, ensuring they are correctly connected. After that, put the back panel back on and plug in the machine.

Finally, run a washing machine cycle to check if the error code has disappeared. With these simple steps, you’ll be able to maintain a working Maytag washer without any frustrating washing machine fault codes disrupting your laundry routine.

8. Inspect the Door Strike

As a Maytag washer owner, it is important to understand the steps to inspect the door strike in order to avoid the dreaded f5 error code from occurring.

This error code indicates a problem with the washer door latch and may prevent your machine from running smoothly or stopping the washing machine spin cycle.

By inspecting the door strike, you can ensure that the latch is properly engaging and avoid any potential issues that may arise in the future.

To do this, firstly, unplug the washer and remove the top panel. Secondly, observe the door strike near the latch to make sure it is properly secured in the mount and not bent or damaged in any way.

Finally, replace the top control panel and plug in the machine to test its functions.

9. Replace the Door Latch

If you’re experiencing the Maytag washer f5 error code, there’s a good chance that the culprit is a broken door latch. Fortunately, replacing the broken latch is a relatively straightforward process that can save you a lot of frustration and inconvenience.

The first step is to locate the replacement parts that you’ll need, which can typically be found online or in a hardware store.

Once you have the parts, carefully follow the manufacturer’s instructions for removing the old latch and installing the new one.

With a bit of patience and attention to detail, you can have your washer working like new in no time at all.

So don’t hesitate to tackle this simple repair project and save yourself the hassle of dealing with the f5 error code.

10. Replace the Cable

If you’re experiencing the dreaded Maytag washer f5 error code, it’s likely due to a faulty cable. Thankfully, replacing the cable is a straightforward process that can resolve the issue and prevent further headaches down the line.

First, be sure to turn off the power source to your washer and unplug it from the wall.

Next, access the back panel of the machine and locate the cable that needs replacing. Carefully remove the old cable and attach the new one, ensuring that it is securely fastened.

Finally, reattach the back panel, plug the washer back in, and turn the power button on.

11. Check the Door Switch and Replace if Needed

The f5 error code can indicate a fault in the door switch of your Maytag washer. To avoid encountering the f5 error code, it is recommended to check the door switch regularly.

First, unplug the machine and remove the front panel to locate the door worn switch.

Next, test the switch with a multimeter for continuity. If the switch does not have continuity, it may be time to replace it.

Don’t let the f5 error code interrupt your laundry routine – follow these steps to check the door switch and avoid encountering the error code in the future.

Preventing Maytag Washer F5 Error Code

Maytag Washer F5 error codes can be prevented by taking some preventive measures. Here are some of the steps to carry out to avoid this error code:

1. Regular Maintenance

Regular washer maintenance can prevent many problems, including the F5 error code. Clean the washer regularly, and check for any permanent damages or defects. Following the manufacturer’s guidelines for properly using the washer and laundry items is also essential.

2. Check Door Lock

A faulty door lock or switch mainly causes the F5 error code. Therefore, ensuring the door lock is functioning is crucial. Check the door lock regularly and replace it if it is defective.

3. Check Electrical Outlet

An electrical outlet that is not working can also cause the F5 error code. Therefore, checking the outlet regularly and ensuring it works correctly is essential.

4. Check Water Inlet Hoses

If the water inlet hoses are not turned on or the water is not flowing correctly, it can cause the F5 error code. Inspect the water inlet hoses regularly, and ensure the water flows correctly.

5. Proper Loading

Overloading the washer with clothing items can cause several problems, including the F5 error code. Therefore, it is crucial to load the washer with only a few clothes and ensure that the clothes are loaded correctly.

6. Call for Professional Help

In case of problems with the washer, it is always advisable to call for professional help.

Contacting an authorized Maytag service provider is the best way to ensure the washer is repaired correctly and prevent further problems, including the F5 error code.

Following the above steps, you can prevent the Maytag washer error codes and ensure your washer functions correctly.


How do I Reset my Maytag washer?

Press the power/cancel button first. Choose a new cycle to run next. To reset your Maytag washer, press the start/pause button. Once you finish that, run a test load to verify that the washer has been reset.

5/5 - (6 votes) Protection Status
error: Content is protected !!