How To Fix F6E3 Whirlpool Washer: 4 Solutions 

How To Fix F6E3 Whirlpool Washer

Is your Whirlpool washer throwing an F6E3 code and delaying your laundry plans? This puzzling experience brings any cycle to an unexplained halt.

But don’t worry, this error message expresses a miscommunication between the main control board and the user interface.

Before calling a pro, let’s explore the common causes and some DIY troubleshooting fixes to get your reliable washing machine back to its optimum performance.

But before investigating the causes and fixes, let’s explore some models with this communication error. Note that this problem commonly affects front-load washers:

Front-Loaders:

  • Whirlpool Duet Washer WTW4800SQ
  • Whirlpool Duet Washer WTW5000DW
  • Whirlpool Duet Washer WTW7300DW
  • Whirlpool Cabrio Washer WFW560CHW
  • Whirlpool Cabrio Washer WFW860CHW
  • Whirlpool Cabrio Washer WAWN7400
  • Whirlpool Duet Washer WFW75HEFW
  • Whirlpool Washer Model WFVW75HEWC
  • Whirlpool Washer Model WFW8400SW

Top-Loaders:

  • Whirlpool Cabrio Washer WTW7300DW2
  • Whirlpool washer WTW4900
  • Whirlpool washer WTG4900
  • Whirlpool Washer Model WTW4815EW
  • Whirlpool Washer Model WTW5000SA

What Does F6E3 Mean on a Whirlpool Washer?

Both the F6E3 and the F6E2 indicate similar issues. Both express miscommunication issues. However, the former narrows the options down to a communication breakdown between the control board and the user interface. The F6E2 doesn’t necessarily express a communication issue between these two specific components.

  • Meaning: When you spot the F6E3 fault on your Whirlpool washer, it signifies poor or non-existent communication between the control board and the user interface (control panel). So, the washer’s control center isn’t receiving or sending signals properly to the control panel.
  • Safety Feature: While frustrating, this code is a safeguard. It protects your Whirlpool washer from further problems with the electronic devices or the drainage system.
  • Impact on Use: The emergence of this code means you can’t complete the cycle. Your Whirlpool washer stops mid-cycle and won’t resume working unless the code is cleared.
  • Warning Signs: Before the code, you may notice unresponsive controls, random error responses, and sudden stops.
  • Importance of Addressing: Addressing this miscommunication reminder is crucial to resume using your washer and avoid potential complications from an incomplete washing cycle.

Why Does Your Whirlpool Washer Show F6E3 Code?

The communication glitch between your washer’s brain and the UI (control panel with lights and buttons) makes the appliance inoperable. The best action to take in this situation is to understand the real causes. Let’s explore the common reasons behind this F6E3 Whirlpool washer error response:

1. Loose Connections

There are wires connecting the appliance control unit to the user interface. Over time, vibrations during wash cycles can loosen these wire connections. This disrupts the flow of electrical signals (information), leading to the F6E3 error. Manufacturer’s installation options often emphasize the importance of secure connections to prevent this issue.

Sometimes, these wires are not loose, but they might corrode or wear out. This also leads to the same F6E3 scenario.

2. Temporary Glitch

Despite their simple nature, temporary glitches can trigger various error codes. These glitches are associated with electronic components. These parts can occasionally encounter temporary malfunctions.

These glitches result from a sudden power surge or voltage fluctuation. Repeated surges and spikes can fry delicate electronic components. Sometimes, these issues trigger a glitch in the communication system, causing the F6E3 code.

3. Control Board Problems

The control board orchestrates all the functions of your Whirlpool washer. While less common, the control board itself could be malfunctioning. If internal components, like sensors, microprocessors, and circuits, on the board are faulty, they might hinder proper communication with the user interface, resulting in the F6E3 alert. In these cases, consulting a qualified repair person might be necessary.

4. User Interface Malfunction

The control board of your Whirlpool washer acts as a bridge between you and the appliance’s internal components. You can give orders to the washer through the panel’s buttons and controls.

In rare cases, the user interface itself might be the culprit. A damaged button panel or faulty display could prevent it from receiving or sending signals correctly, leading to a communication error. While less likely than other causes, a malfunctioning user interface would still trigger the F6E3 error response.

How To Reset Whirlpool Washer F6E3 Code

This method is known as a soft reset. It is useful in case of facing glitches triggering the Whirlpool washer F6E3 code. Here’s how to do it:

  1. Disconnect the power cord from the wall outlet. Don’t rely on the washer’s power button or any icons on the menu to turn it off completely. A physical disconnect ensures the washer is off and eliminates any residual power that might prevent the reset from working.
  2. Allow the washer to sit unplugged for around 5-10 minutes. This gives any capacitors in the control board time to discharge completely. You can even reset your kitchen’s circuit breaker if you’re unsure about the specific outlet powering the washer. This will ensure a complete power down for the entire circuit.
  3. Plug the washer back in or turn the power back on at the power unit. The reset might clear the temporary glitch, and your washer should function normally.

How To Fix F6E3 Error Code on Whirlpool Washer

Dealing with the control board and user interface requires professional hands. However, you can sometimes try to implement some DIY fixes before taking things to the next level:

1. How To Fix Loose Connections

Tackling loose connections inside your Whirlpool washer requires no more than a Phillips screwdriver and familiarity with electrical wires. Here’s what you can do:

  1. Unplug the appliance from its power source. Remove the screws holding your washer’s back panel.
  2. Look for a bundle of wires connecting the control board to the user interface. These wires are secured with a few plastic connectors.
  3. Try to touch each connector to check for looseness.
  4. If you find any loose connectors, firmly push them back in place. Make sure they are fully secured in their original position. These friction-fit connectors should snap hassle-free in place.
  5. If the wires or connectors appear cracked, or corroded, consult an electrician. Professional replacement is required in this case.

2. How To Fix Temporary Glitch

The right fix for minor software glitches is resetting the appliance as explained before.

3. How To Fix Control Board Problems

It is recommended to seek professional help to diagnose, repair, or replace the control board. But if you are comfortable enough to handle this responsibility, here’s what to do:

  1. Find the control board behind the back panel. It is a large circuit board with a microprocessor and memory chips.
  2. Check the board for any visible signs of damage, such as burnt circuits or faulty components. If present, you may need to replace the whole board.
  3. To be extra sure of your diagnosis, test the board’s continuity. Use a multimeter for a continuity test. Set the device to the continuity setting.
  4. Place one multimeter lead on one terminal of the control board and the other lead on another terminal.
  5. Consistent beeping or a value near zero indicates a functional board. Otherwise, you will need to replace the defective board.

4. How To Fix User Interface Malfunction

The control panel issues are easier to handle compared to those of the control board. However, you need to be sure of your knowledge and comfort with similar parts. If you have the right troubleshooting skills, here’s what should do:

  1. Disconnect the washer from its power source.
  2. Find the panel at the top front part of your Whirlpool washer. Use a screwdriver to remove its cover.
  3. Inspect the user interface for any visible damage, such as broken buttons or a burnt display.
  4. These damage signs call for buying a new panel that is compatible with your Whirlpool washer’s models and installing it in the exact location of the old device. Search for a new panel at an online merchant or a physical home improvement shop.

Conclusion

In your ongoing battle against overflowing laundry baskets, the F6E3 code on your Whirlpool washer can make you lose the war. This control board and control panel miscommunication issue halts the harmony of your laundry routine and makes the washer unresponsive and inoperable.

But, this guide has illuminated the path from confusion to clarity, detailing the causes and the possible solutions.

Loose connections, temporary glitches, control board problems, and user interface malfunctions are common causes of this error. To fix it, you can try a soft reset by disconnecting the power, securing loose connectors, or replacing damaged components.

Don’t let this error code stop you from enjoying clean and fresh laundry! Call a professional technician if things are complex for you.

Stuck with other Whirlpool washer error codes? Take a look at these guides on how to fix f8e3 whirlpool washer or how to fix f6e1 whirlpool washer

5/5 - (1 vote)
DMCA.com Protection Status
error: Content is protected !!