Is your LG dryer making noise and disrupting the harmony of your laundry routine? When an LG dryer is performing well, it makes soothing hums throughout its cycles.
You’ll be surprised by continuous clanging, whining, grinding, and squeaking if not well.
For instance, the drum could be throwing tantrums, a clogged vent trying hard to grasp air, or even old buildup accumulating on some parts making them go wild.
Instead of giving in to confusion, we are here to help you. In this comprehensive guide, we’ll decode its sounds, determine the conductors, and bust the noisy demons out!
Why Is Your LG Dryer Making Noise?
While doing a decent job in terms of reliability, LG dryers have their fair share of problems. Taking a quick look at online user forums might prove that the unusual noise issue is not a rare problem.
Many other users complain about dryer squeaks, rattling, and other strange noises.
An LG dryer can act out by making noise when it has ventilation issues or broken components. Also, its drum could whine when its belt becomes loose or frayed.
But no more playing the guessing game. Now is the time to take a deep dive into all the possible causes and their fixes.
1a- Bad Drum Rollers
These plastic small components are the backstage orchestrators of the drum’s smooth spins. But if they go kaputt, the drum starts throwing tantrums. In most cases, bad drum rollers are behind the disrupting squealing from your LG dryer’s front side.
With every drum spin, worn-out rollers squeak as if they object to your LG dryer drum motion. Ignoring them leads to straining the whole dryer and causes expensive repairs, irreversible part failure, and even early retirement of the appliance.
2b- How To Fix Bad Drum Rollers
Fixing this common sound issue begins with locating and diagnosing the roller’s condition. These rollers are tucked right beneath the drum. To correctly find and fix them, you should do the following:
- Unplug your LG dryer from the power source.
- Remove the front panel using a Phillips screwdriver.
- Tilt the drum a bit to expose the rollers.
- Inspect the rollers for damage or looseness.
- Use your socket wrench to loosen the bolts holding the faulty rollers.
- Tighten loose rollers that appear to be in good shape.
- Replace the bad ones and add a small amount of silicone-based lubricant to the shafts.
- Don’t overuse the grease to avoid attracting unwanted buildup.
- Reassemble everything and give the drum a manual spin to ensure it’s no longer wobbling.
2a- A Jammed Drum
Has your LG dryer exchanged its usual humming noise for unexplained bangs and clangs? Don’t worry, no gremlins are at each other’s throats inside the dryer. It could be just a rough sock, stuck zippers or buttons, hidden coins, or even a small kid’s toy.
Foreign objects stuck between your LG dryer drum and its wall create non-stop cries for freedom throughout the entire drying cycle.
Leaving this problem unattended isn’t an option. From drum misalignment to overheating meltdowns, these hidden troublemakers can turn your dryer into a graveyard of internal components.
2b- How To Fix A Jammed Drum
A jammed drum got you puzzled? Fear not! This fix is easier than mastering a spin cycle. You can use your screwdriver to remove the panel in the front of the dryer.
In some models you may needs to pop off the rear panel.
Now you can slightly tilt the drum to view its folding and housing. For better visuals, you can bring a flashlight along. Also, a powerful magnet comes in handy to attract runaway metal culprits in no time.
A long tweezer or a vacuum cleaner with a nozzle attachment picks up the scattered contaminants without getting your hands dirty.
Once done, it’s time for the grand finale. Reassemble the machine, connect it back to the power source, and give your dryer a test cycle.
3a- A Faulty Bulkhead Felt
You may automatically blame the dryer belt as the unwanted screeching symphony continues. But it could be an unsung hero you’ve never met or even heard about before, the bulkhead felt.
As the name suggests, it’s a felt strip that acts as a velvet rope, separating your laundry from the metal tub of your LG dryer.
This component is attached to both sides of the bulkhead, and it seals this area. Among its peacemaking duties is preventing lint buildup from reaching the motor area.
With continuous use, the silent warrior may become wounded and thin out. Once it becomes barbed wire, it loses its ability to prevent lint from passing through.
At this moment, you can expect non-stop rattling noise and tumbling chaos. But things won’t stop there. Your fallen felt can cause serious complications, such as:
- poor drying quality
- A blocked blower wheel
- strained pulleys
- motor overheating
- fire hazards
3b- How To Fix A Faulty Bulkhead Felt
Before curtain-calling on this felt, you may want to perform this simple lint test. You don’t have to detach or disconnect parts other than the LG dryer’s power source. Optionally, you can remove the front panel for better access.
Rub a small cloth against the felt on the drum frame. Check the cotton piece of cloth for lint residue. If it shows a significant amount of residue, the old warrior must retire immediately.
With the right tools, you can easily apply this DIY fix to replace worn felt. Bring these trusty companions along:
- A screwdriver
- A 10 mm socket wrench
Now let’s get to work:
- Use your screwdriver to disassemble the front, control, and top panels, along with the drive belt.
- Tilt the cylindrical drum forward for better visuals and access.
- Find the martyred warrior nestled behind the drum’s metal frame. It’s attached to the front and rear bulkheads.
- Install a new one and reassemble the detached parts accordingly. At this point, you can check the manual for further guidance.
4a- Drum Overloading
Do you notice your laundry slamming the drum or moshing against its metal frame? This points to overloading issues. Despite its recurrence, drum overstuffing doesn’t usually become on your radar when your dryer does the Harlem shake.
As the drum spins, the drum belt and motor struggle with the extra weight. Moreover, the drum wobbles continuously due to a wash load imbalance. Crammed clothes choke the drum’s breath, limiting airflow and turning the heat inside tepid. The result?
- Damp and wrinkled laundry
- Extended drying sessions
- Your breathless dryer goes the extra mile just to get the job done
- More energy costs
4b- How To Fix Drum Overloading
While ongoing overloading leads to loud rumbling noise and potential LG dryer parts failure, there is a bright side. The good news is that there is no replacement required to handle this situation.
If you notice that some of the laundry is trying to break free, all you should do is disconnect the LG dryer from power.
Then, browse the manual for information on the right load size and weight. Remove some of the extra load until the drum seizes its wobbly wobbles.
For future prevention, you should do your homework before hitting the start button. Sort the load by fabric type, dampness levels, and clothes thickness.
Also, use the LG dryer fill line as your compass. This guiding line may have different locations depending on the dryer model. For instance, you can find it on the drum’s inner rim or the rubber door seal.
5a- A Dying Motor
This hardware problem doesn’t happen all of a sudden. There are early signs of wear in other components that develop into motor strain and overworking. A dying motor leads to all kinds of noises and vibrations.
Thumping noise, rattling sound, and grinding roars should alarm you about decreased motor power.
The beating heart of your LG dryer can wear and tear if blocked by lint buildup or debris. Also, electrical problems can fray the elusive metal backstage maestro.
Aging plays a crucial role in bringing the sturdy warrior to retirement.
Aside from the groaning sound, you’ll notice stutters during spins. You might smell burned rubber coming from the dryer.
5b- How To Fix A Dying Motor
Unfortunately, there is no fix for a damaged motor. It’s time for its discharge from service. However, replacing a motor isn’t for DIY enthusiasts.
You should seek professional help to ensure proper installation and the eternal silence of the squeaky serenade.
Different Types of LG Dryer Noise
You should take some time to identify your dryer’s strange noises. Listening closely and deciphering different sounds helps in identifying the problem.
Here’s a quick reference to the most common LG dryer noises:
LG dryer making scraping noise
Scraping noise usually comes from faulty components in the drum. When your LG dryer starts its scraping noise, you should investigate worn drum rollers, glides, seals, or bulkhead felt.
LG dryer making squeaking noise
Dryers can never hide their high-pitched squeaks. You can always blame a worn, loose, or misaligned drum belt. Whenever this component goes rogue, friction increases, and internal components wear quickly. Readjusting or replacing the problematic belt can silence the squeaks.
LG dryer making squealing noise
Squealing and squeaking can resemble similar issues. Start by taking a look at the belt or the idler pulleys. Sometimes, the solution is as simple as greasing their surfaces. In other cases, replacing the shrieking parts.
LG dryer making rattling noise
Rattling sounds coming from your LG dryer are easy to tackle, as they usually point to loose screws and nuts. Ongoing rattles and clangs can accompany runaway socks, coins or any given foreign objects stuck between the drum and its housing. You can address this noise type by tightening loose members.
LG dryer makes noise when tumbling
As your LG dryer starts its tumbling rhythm, a strange noise may tag along. This could be a sign of dryer overloading, making the drum wobble. Failing drum rollers won’t support the drum adequately. So, they should be replaced.
LG dryer banging noise
Hearing a banging noise should be alarming to you. In most cases, it indicates a serious problem such as a failing motor, a defective blower wheel, or a dislodged drum weight. Usually, you will need professional aid to get rid of this annoying noise.
As you bid farewell to your LG dryer making noise, remember a silent dryer, is a healthy and happy performer.
So, while laid-back humming comes as a part of normal operation, any squeaking, squealing, howls and other unusual LG dryer noises deserve your attention.
If present and persistent, you should investigate rebellious drum rollers, trapped sock in the jammed drum saga, or the unsung bulkhead felt.
Our detailed DIY guide has narrowed down the culprits for you and provided reliable remedies.
Now, you’re in charge! Embrace these DIY fixes, or professional dryer repair services when the motor’s last hum fades. Grab your tools and roll up your sleeves to restore the peaceful hum of a well-maintained LG dryer.
In case your LG dryer shows other signs of malfunction like a drum not spinning or it won’t turn off when the cycle ends, take a look at these blog posts for further troubleshooting guidance: