Maytag Dryer PF Code: Causes & 3 Ways To Fix It Now

The Maytag brand is well-known for its efficiency, like the Maytag Neptune dryer, but any electric dryer can face some errors over time. The errors can result from internal or external factors; knowing the factor helps you solve the issue.

In the PF error code, the dryer stops working and fails to start or complete a cycle which can be a frustrating experience, especially if you don’t know the cause of the error or what it means.

However, you don’t have to worry because, in this article, I will discuss the causes of the Maytag dryer code PF. In addition, I will explain how to solve, avoid, and prevent each cause.

Maytag Dryer Code PF
The Maytag dryer PF code indicates that the Maytag dryer suffered from a power interruption which can happen due to different reasons, for example, a power outage, improper electrical connection, or malfunctioning main control board.

Causes of Maytag Dryer PF Code

The PF code means a power failure caused by a power interruption; as a result, the processor faces an issue that makes the dryer unable to start or complete the cycle.

The power interruption can result from a power outage, poor wiring connections, or a faulty main control board. The electric dryer displays the PF error code to alert you that something is wrong with your electrical system.

1- Power Outage

If your dryer is interrupted during its dryer cycle, it will display the PF error code; a power outage is a form of power interruption; therefore, if you face a power outage while using your dryer, you face the PF code.

If the voltage goes above the limits of your dryer fuses or there is a power surge, the fuses will get broken or damaged. Damaged fuses will result in the PF error code because the fuses have melted and caused a power outage.

2- Poor Electrical Connection

Poor wiring connections can be divided into several things. If the power cord of your electric dryer is not well connected to the electrical socket, it’s considered a poor electrical connection.

If the power cord is damaged, like having tears or breaks, it can affect the power supply to the dryer, which will cause power interruptions, consequently resulting in the PF error code.

The power cord is connected from one side to the dryer’s plug and from the other side to the main board. The electrical connection between the main board and cord can be faulty, which causes the PF error code.

3- Faulty Electronic Control Board

Many dryer fault codes result from a faulty main control board; therefore, if the electrical connection is in good condition and there were no power interruptions. The electronic or main control board is the part you will need to check.

If the voltage of the motor drops because of the board’s motor relay, it will result in power interruptions from the main control board. So, the PF error code can be an alarm of a power supply issue in the main control board.

How to Fix Maytag Dryer PF Code

After going through the causes of the Maytag dryer PF code error and knowing that the leading cause behind this code is a power interruption, now, I will help you solve each cause.

1- Reset Your Dryer

The first solution is to reset your dryer; resetting your dryer helps to clear out the PF error code after power outages. You can reset your dryer in two different ways.

The first way is to press and hold the electric dryer start button; a drying cycle will start after a couple of seconds. Then, press the power button, which should clear the PF code.

The second way is to turn off the household circuit breaker for one minute and then turn the circuit breaker on. The next step is to test your dyer for one minute to ensure the PF code is solved. You should perform the circuit breaker step again to ensure you reset your dryer.

2- How to Fix a Poor Electrical Connection?

Poor wiring connections have different reasons; let’s fix each step by step first if the power cord is not inserted correctly into the electrical socket. You will need to ensure the prongs of the dryer plug are connected to the socket.

Next, check the power for any breaks or tears; if the tear is small, you can use high-quality electrical duct tape to fix the issue. You must replace the power cord if the breaks and tears are severe. Torn power cords are dangerous for your and your household’s safety.

After ensuring the power cord is in good condition, check the connection between the power cord and the main electric board; if the connection is poor, you will need to fix and tighten the connection.

3- How to Fix a Faulty Main Control Board?

If the main control board is the reason behind the PF error code, you will need to either repair it or replace it with a new one. For the replacement steps, follow the following guide:

  1. Disconnect the dryer from power.
  2. Unscrew the screws at the dryer back panel.
  3. Using your phone take a picture of the control board. (Wiring Reference)
  4. Disconnect the wires connected to the board.
  5. Remove the control board from the mounting bracket to take out.
  6. Place the new control board and secure it using the mounting bracket.
  7. Connect the wires to the new board using the reference picture.
  8. Install the back panel and secure it using the screws.

Preventing Maytag Dryer PF Code

After mentioning the possible causes and explaining the solutions to the PF error code, I will tell you how to prevent and avoid the PF error in the future.

1- Avoid Power Interruptions

The PF error code results from power interruptions; therefore, if you avoid the power interruptions, you will decrease the chances of facing the PF error code.

So, when you power off your dryer, don’t unplug it from the electrical outlet instead of using the power button. Unplugging the electric dryer while it’s working is a power interruption, which will cause the PF error code.

You will need to consider purchasing a generator if your household’s electricity is unstable. Power outages will cause the PF error code, so if you have a generator, you will avoid the error and keep your electric appliances safe.

2- Regular Maintenance

Maytag dryer is an electrical appliance at the end of the day, and it requires regular maintenance to ensure it keeps its top performance. If you regularly check the dryer, you will ensure you have a good electrical connection.

If you find any loose or broken wiring, you will need to replace it; also, the power cord must be checked for any breaks or tears. The connection between the dryer cord and the main control board also must be checked to ensure a stable power supply to the board.

Frequently Asked Questions (FAQ)

After discussing the cause, solutions, and how to prevent the PF code, the following are the most common questions related to the Maytag dryer PF code issue.

1- What Does Maytag PF Code Stand for?

Maytag PF code stands for “Power Failure”; the power failure results from power interruptions. A power outage can cause interruptions, poor electrical connection, or a central control board issue.

2- How to Reset a Maytag Dryer?

There are two ways to reset your Maytag dryer; the first is by pressing and holding the dryer start button, and after a couple of seconds, a drying cycle will start. Then, press the power button, which will clear the PF code.

The second way is by turning off the circuit breaker for one minute and turning it back on. Power on your electric dryer and give it one minute to see if the error is solved.


At the end of the article, I understand how the PF error code can be frustrating. However, through this article, you can quickly fix the issue, prevent, and avoid it.

The PF code stands for power failure, which is the result of power interruptions. There are different reasons for power interruptions, like a power outage, improper wiring connections, or malfunctioning of the main control board.

The first step to take when solving the PF error code is to reset your dryer. You can do it in two ways: using the buttons to reset it or the circuit breaker.

5/5 - (5 votes) Protection Status
error: Content is protected !!