Midea Dishwasher Not Draining: 5 Easy Ways To Fix It Now

Experiencing a Midea dishwasher that’s not draining can be frustrating, especially when you rely on this appliance for efficient and speedy kitchen cleanup.

Don’t worry, though, as there are various possibilities for this issue, many of which can be resolved without the need for professional help.

In this article, you’ll find some useful steps to diagnose and fix the common problems that may lead to a Midea dishwasher not draining properly.

With a little bit of patience, some basic troubleshooting skills, and the information provided, you’ll be able to tackle this problem head-on and confidently return your Midea dishwasher to its optimum performance.

Why Is Your Midea Dishwasher Not Draining?

Sometimes, you might face an issue where your Midea Dishwasher is not draining properly.

There can be several causes for this issue, and we’ll address them below.

1. Clogged Dishwasher Filter

One reason your Midea Dishwasher is not draining could be a clogged filter.

Daily use of your dishwasher may cause it to accumulate debris, which can obstruct the flow of water through the filter.

To address this issue, regularly check the filter’s condition, remove it, and clean it to ensure an efficient drainage process.

2. Drain Hose Blockage

The drain hose is responsible for transferring dirty water out of the dishwasher.

If it’s blocked or kinked, the water won’t be able to flow freely, resulting in standing water inside the dishwasher.

To fix this, check the drain hose for blockages and ensure it’s correctly connected to the dishwasher and sink.

3. Faulty Drain Pump

Another possible reason for your Midea Dishwasher not draining is a faulty or malfunctioning drain pump.

The drain pump is a vital dishwasher component that pumps out the dirty water.

If it has failed or is broken, the dishwasher will be unable to remove the standing water.

In this situation, you will likely need to contact a professional to repair or replace the drain pump.

4. Air Gap Issues

Some dishwasher models have an air gap installed on the sink’s top to allow air to enter and prevent dirty sink water from draining back into the dishwasher.

If the air gap is clogged, it can cause your Midea Dishwasher not to drain.

Check and clean the air gap to ensure it’s free of obstructions, enabling water to flow correctly.

By addressing these common issues, you should be able to resolve the drainage problem with your Midea Dishwasher.

Remember that regular maintenance and cleaning of your dishwasher components will significantly reduce the chances of encountering these issues in the future.

How To Fix A Midea Dishwasher Not Draining

The Midea dishwasher is an essential kitchen appliance, but like any other machine, it may face issues like not draining properly.

Here are some troubleshooting steps to fix your Midea dishwasher not draining issue.

1. Check the dishwasher cycle

Ensure the dishwasher cycle has been completed.

Some cycles may take longer than you expect, so ensure the cycle is finished before assuming there is an issue with draining.

2. Inspect the power and reset buttons

Check your dishwasher’s power and reset buttons to ensure they work correctly.

In some cases, turning the power off and on again or pressing the reset button can resolve the drainage issue.

3. Clean the filter

A clogged filter may prevent the dishwasher from draining correctly.

Remove the filter according to your user manual instructions and clean it thoroughly under hot water.

If there is a stuck-on gunk, soak it in hot, soapy water for a few minutes before gently scrubbing it with a soft brush and rinsing.

4. Examine dishwasher components

Check various dishwasher components, such as the broken temperature sensor or the micro switch, that could be causing drainage issues.

If you suspect any of these components are faulty, consult an appliance technician for a proper diagnosis and repair.

5. Hire an appliance repair professional

If you cannot fix the drainage issue on your own, consider contacting an appliance repair technician.

They can diagnose the problem, provide expert advice, and repair faulty dishwasher components when necessary.

By following these steps, you should be able to address and fix your Midea dishwasher‘s draining issue without any major complications.

How To Prevent The Problem

To prevent your Midea dishwasher from not draining properly, you should consider the following tips to keep your dishwasher running smoothly:

1. Check Water Temperature

Make sure the water temperature is set correctly.

Run your dishwasher with hot water to help dissolve grease and food particles that could clog the drain.

A water temperature of 120-150 degrees Fahrenheit is ideal for most dishwashing cycles.

2. Ensure Proper Water Pressure

Maintaining adequate water pressure in your dishwasher ensures the spray arms effectively clean the dishes and prevent clogged filters.

Check your water supply hose and water inlet valve for any obstructions or damage that could negatively impact water pressure.

3. Use the Appropriate Wash Cycle

Select the correct wash cycle for your load of dishes.

This helps to reduce the risk of food debris getting stuck in the dishwasher drain.

Heavily soiled dishes may require a more intensive cycle, while lightly soiled dishes can be cleaned with a shorter cycle.

4. Use High-Quality Dish Soap

Good quality dish soap can significantly reduce the chances of your dishwasher not draining.

Low-grade detergents might not effectively dissolve food particles, leading to clogs in the drain system.

Investing in a higher quality detergent ensures better performance and reduces the chances of drainage issues.

5. Routinely Clean the Dishwasher

Another essential measure to prevent drainage problems in your Midea dishwasher is to clean it regularly.

Remove and rinse the filter to keep it free from accumulated food debris.

Use a solution of warm water and vinegar to clean the spray arms, removing any stuck-on grime or food particles.

6. Check the Sink Drain

Ensure that your kitchen sink drain is functioning properly and is free of clogs or other debris.

A clogged sink can affect the flow of water in your dishwasher and hinder proper drainage.

By following these steps, you can help maintain a reliable dishwasher and prevent draining issues in your Midea dishwasher.

5/5 - (8 votes)
DMCA.com Protection Status
error: Content is protected !!