Beko Dishwasher Not Draining: 6 Easy Ways To Fix It Now

Having issues with your Beko dishwasher not draining can be quite frustrating, as water buildup in your appliance can lead to unpleasant odors and poor cleaning performance.

Addressing this problem is crucial to ensure your dishwasher functions properly and keep your dishes clean and fresh.

In this article, we’ll discuss the possible causes behind your Beko dishwasher’s drainage problems and guide you on how to troubleshoot these issues on your own.

We’ll provide you with helpful tips and solutions to restore your dishwasher’s draining capabilities and get it back to working efficiently, saving you both time and effort.

Why is Your Beko Dishwasher not Draining?

There could be several reasons why your Beko dishwasher is not draining properly.

This section will discuss some of the most common issues and how to address them.

1. Dirty or Clogged Drain Filter

Your Beko dishwasher has a drain filter that needs to be cleaned regularly to ensure proper water drainage.

Food debris can accumulate in the filter, leading to blockages and bad odors.

To clean the drain filter, pull out the bottom rack of your dishwasher, remove the filter, and wash it under running water.

Make it a habit to clean the filter once a week to maintain optimal water drainage.

2. Blocked Pump Filter

The pump filter is another crucial component that requires regular maintenance.

A clogged pump filter can hinder the dishwasher’s ability to drain water efficiently.

Locate the pump filter at the bottom of your dishwasher, carefully remove it, and clean it thoroughly.

Checking and cleaning the pump filter regularly can help prevent water drainage issues.

3. Clogged Drain Hose or Garbage Disposal

Blockages in your dishwasher’s drain hose or garbage disposal can cause water to remain in the dishwasher.

Ensure there are no kinks or clogs in the drain hose, and check that the garbage disposal is functioning correctly.

If you have recently installed or reset your garbage disposal, make sure the knockout plug is removed to allow water to drain from the dishwasher.

4. Faulty Drain Pump or Float Switch

A malfunctioning drain pump or float switch could prevent your Beko dishwasher from draining the water.

If your dishwasher displays an error code related to a drain pump or float switch issue, it may be time to call a professional for repair.

How to Fix a Beko Dishwasher Not Draining

When your Beko dishwasher is not draining properly, it can be both frustrating and worrying.

To fix this issue, follow the steps below to address common causes and restore your dishwasher to normal functioning.

1. Check the dishwasher filter

Your dishwasher filter might be dirty, preventing the water from draining.

To clean it, remove the filter from the machine as directed in the owner’s manual.

Rinse it thoroughly under hot water.

If there is stuck-on gunk, soak the filter in hot, soapy water for a few minutes, then gently clean it with a soft brush before rinsing.

2. Inspect the drain hose

A kink or clog in the drain hose can prevent water from flowing from your dishwasher.

Disconnect the hose from both the dishwasher and the sink or garbage disposal.

Check for kinks or obstructions and straighten or clear them if necessary.

Ensure the drain hose is installed according to the instruction manual to prevent future issues.

3. Examine the water supply and inlet valve

Confirm that your dishwasher is receiving sufficient water pressure.

A problem with the water supply or inlet valve can cause inadequate water flow.

Turn off the water supply, disconnect the inlet valve, and check for debris or damage.

Replace the valve if needed, then turn the water supply back on and test the dishwasher.

4. Ensure the detergent dispenser is functioning

If the detergent is not dissolving during a wash cycle, it might prevent proper draining.

Make sure your detergent dispenser is clean and dispensing detergent as intended.

If it is faulty, consult the owner’s manual for repair or replacement instructions.

5. Check the garbage disposal

If your dishwasher drain hose is connected to a garbage disposal, make sure the disposal is functioning correctly and not causing any blockage in the drain.

6. Look for a bad dishwasher drain pump

A damaged or faulty drain pump can result in poor drainage.

Consult your owner’s manual for instructions on inspecting and replacing the drain pump.

How to Prevent the Problem

Various factors can cause a Beko dishwasher not to drain.

To avoid encountering this issue in the future, follow these preventive measures:

1. Regularly Clean the Dishwasher Filter

Food particles and debris can accumulate in the dishwasher filter, leading to improper water drainage.

Ensure you clean the filter regularly by removing it and rinsing it under running water.

2. Avoid Overloading the Dishwasher

Overloading the dishwasher can lead to inadequate water circulation and cause food remnants to block the drainage system.

Load your dishwasher appropriately, placing larger items at the back and smaller ones at the front.

3. Clear Food Remnants from Dishes

Before placing dirty dishes in the dishwasher, scrape off food particles to reduce the chances of the drainage system getting clogged.

This will ensure proper water drainage during the rinse cycle.

4. Ensure Proper Installation of the Drain Hose

A kink in the drain hose can hinder proper water drainage.

Ensure the hose is installed without any bends or kinks and securely fastened to the plumbing under the sink.

5. Keep the Dishwasher Clean

Regularly cleaning your dishwasher ensures all parts function correctly.

Use a dishwasher cleaner to remove buildup in the chamber and basket, which can cause drainage problems over time.

5/5 - (8 votes)
DMCA.com Protection Status
error: Content is protected !!