Samsung dishwashers are popular due to their efficiency and advanced features. However, like any other appliance, they can occasionally encounter issues. One common problem is the OE code, which can be frustrating and confusing for users.
This article will explain the causes of the Samsung dishwasher OE code and provide five ways to fix it. We will also discuss preventative measures to avoid this issue in the future.
Causes of Samsung Dishwasher OE Code
The OE error code in a Samsung dishwasher is typically caused by too much water in the appliance, resulting from a clogged filter, water pump issues, drainage problems, or a malfunctioning water inlet valve. Any of these can disrupt the circuit and cause dishwasher error codes.
1. Water Level Sensor Malfunction
The OE code may appear if the water level sensor in your Samsung dishwasher is not functioning correctly. This sensor measures the water in the dishwasher and ensures it is at the proper level. If you have a water level error, the dishwasher may overfill or underfill, leading to a circuit breaker.
2. Blocked or Kinked Drain Hose
A blocked or kinked drain hose can also cause the OE code to appear on your Samsung dishwasher. The drain hose removes water from the dishwasher during the drain cycle. Water cannot drain if blocked or kinked, resulting in the OE error mode.
3. Faulty Drain Pump
A malfunctioning drain pump is another major cause of the OE code. During the drain cycle, the drain pump is in charge of pumping water out of the dishwasher. If the pump fails to function properly, the dishwasher cannot remove water, resulting in the OE code appearing on the display.
4. Clogged Filter
A clogged filter in your Samsung dishwasher can also lead to the OE code. The filter is responsible for trapping and controlling food particles and debris to prevent them from entering the drain hose and pump. Water cannot drain properly if the filter becomes clogged, leading to the OE error.
5. Debris in the Drain Pump or Hose
Debris, such as food particles, can accumulate in the drain pump or hose over time. If this debris builds up, it can obstruct the water flow and cause the OE code to appear.
How to Fix Samsung Dishwasher OE Code?
If you want a solution to your problem, you should begin by inspecting and cleaning any blockages in the drain hose, sink connection, filter, sump pump, drain, and valve; fixing loose connections doesn’t resolve the issue, consider seeking professional assistance for potential part replacement.
1. Check and Clean the Water Level Sensor
The water level sensor is a crucial component of your Samsung dishwasher, as it monitors the water inside the appliance during a wash cycle. If the sensor is dirty or not functioning correctly, it may cause an issue with the circuit or water supply.
First, locate the water inlet valve and the level sensor in your dishwasher to address this issue. It is usually found near the bottom of the appliance. Carefully inspect it for any dirt or debris and clean it gently with a soft cloth and warm water. Sometimes, the answer to your issue is to replace it with a new one.
2. Inspect and Clear Drain Hose
The drain hose removes water from your dishwasher after a wash cycle. A blocked or kinked hose can prevent water from draining, leading to the OE code. Locate the drain tube at the back of your dishwasher and inspect it for any obstructions or kinks to resolve this issue.
If you find any obstructions, remove them carefully from the circuit to allow water to flow freely through the hose. You can also use a plumber’s snake or a long flexible brush to clean the hose from the inside effectively.
3. Test and Replace Drain Pump
A faulty drain pump or your Samsung dishwasher error codes are on the display or the control panel. The drain pump is responsible for pumping out excess water from the appliance. Test the water drain pump by listening for unusual noises during draining.
If you suspect the pump is malfunctioning or damaged, you must replace it. Consult your dishwasher’s user manual for exact information on accessing and replacing the drain pump.
4. Clean the Filter
A dirty filter can also contribute to the OE code issue. The filter in your Samsung dishwasher helps to prevent large particles of food and debris from entering the drain system. Over time, the filter can become clogged, reducing its effectiveness and causing water to accumulate inside the appliance.
To clean the filter, first, remove it from your dishwasher. Rinse it under warm water and use a soft brush to remove any debris lodged in the filter. Once the filter is clean, replace it in the dishwasher.
5. Remove Debris from the Drain Pump and Hose
Debris and food particles can sometimes accumulate in the drain valve, pump, and hose, obstructing the water flow and causing the OE code to appear. Regularly inspect the drain pump and hose for debris to prevent this issue.
Remove any obstructions you find to ensure proper water flow and prevent the OE code from reoccurring. By following these solutions, you can help your Samsung dishwasher run smoothly and efficiently, avoiding the inconvenience of the OE code.
Preventing Samsung Dishwasher OE Error Code
In some cases, preventing is the answer to avoiding issues with your dishwasher. Depending on your dishwasher model, you can try different things, such as:
1. Regularly Clean the Filter
To prevent the OE code, regularly clean your Samsung dishwasher’s filter. A clean filter will prevent debris from entering the drain hose and pump, ensuring proper water flow. You should clean the filter once every two weeks or more frequently if you use your dishwasher frequently.
The filter must be cleaned under running water, preferably using a soft brush to control movements better.
2. Inspect the Drain Hose Periodically
Regularly check the drain hose for any blockages or kinks. You can prevent the OE code from appearing by ensuring that the drain hose is free of obstructions. Inspect the drain hose every few months to ensure it’s in good condition.
If you find any blockages, carefully remove them to restore proper water drainage. If the hose is kinked, try to straighten it out; consider replacing it if it’s severely damaged.
3. Avoid Overloading the Dishwasher
Overloading your dishwasher can lead to poor water circulation and drainage. To prevent the OE code, load your dishwasher according to the manufacturer’s recommendations and avoid overloading it.
Arrange dishes, pots, and pans in the appropriate racks, leaving enough space between them for water to circulate freely. Properly loading your dishwasher can ensure better cleaning results and reduce the risk of encountering the OE code.
4. Scrape Dishes Before Loading
To prevent debris from accumulating in the drain pump and hose, scrape food particles off your dishes before loading them into the dishwasher. This will reduce the chances of the OE code appearing.
You don’t need to pre-wash your dishes, but removing large food particles and scraps will help keep your dishwasher’s drainage system clear. By adopting this habit, you can prolong the life of your dishwasher and avoid unnecessary repairs.
A proactive approach to maintaining your Samsung dishwasher can help prevent the OE code and keep your appliance running smoothly. Regular cleaning, proper loading, and periodic inspections of the filter, drain hose, and other components are essential for optimal performance.