Whirlpool Cabrio Dryer Squeaking When Turned On [Fixed]

whirlpool duet dryer squeaking when turned on

Imagine this: a new day in the laundry room, and you just turned on your Whirlpool Cabrio dryer, only to find a loud squeaking serenade instead of the almost quiet motor hums. Frustrating, isn’t it?

Before reaching for your earplugs, grab your dryer maintenance kit. It’s time for some DIY troubleshooting for your Whirlpool Cabrio dryer squeaking when turned on.

In this comprehensive guide, we’ll embark on a journey to diagnose the causes behind the high-pitched Whirlpool Cabrio Dryer opera and find suitable remedies.

So, stay tuned to restore peace and quietness to your laundry oasis.

Why Is Your Whirlpool Cabrio Dryer Squeaking? Causes and Solutions

Squeaks or unusual shrills from a Whirlpool Cabrio happen due to a cluster of internal and external causes.

 A Whirlpool Cabrio Dryer may squeak when it has bad pulleys, plugged drum rollers, or a bad motor.  Sometimes, the cause might be as simple as an overloaded drum, loose screws, or a stuck metal object on the drum edges.

Now, it’s time to deeply investigate these causes and their fixes.

1a- Chocked Drum Rollers

The drum roller hides behind the dryer drum for proper balance and support. With frequent use, these hardworking heroes may become a new home for limitless lint residue.

Lint buildup will eventually block the grooves and ridges of the rollers, preventing their rotation and causing friction.

Increased friction means an annoying squealing noise that makes a rusty swing in a deserted playground sound much nicer.

Moreover, the drying quality and the drum’s well-being will be affected by this friction.

1b- How To Fix Chocked Drum Rollers  

Unblocking choked drum rollers is easy and requires a few tools, such as a screwdriver, a vacuum cleaner (or a brush), and a pair of gloves.

Following these steps will help you troubleshoot squealing rollers easily and quickly:

  • Remove the dryer from the outlet to avoid electric hazards.
  • Remove the screws on the front panel to access the drum.
  • If the drum has holding clips, remove them.
  • Gently pull the drum forward to locate the rollers.
  • Use the vacuum or the brush to remove lint from the whole area, including the vent and under the drum.

2a- An Overloaded Dryer

Ever experienced the chaos of an overstuffed closet? Misshaped laundry is not the only issue there. Now, imagine your Whirlpool Cabrio Duet Dryer craves some breathing room as well.

An overloaded drum will not only cause uneven drying but also cause internal damage to the drum and the motor.

Typically, such damages won’t occur after that one time. However, if you turn this overstuffing exception into a habit, a squeaky dryer will only be the tip of the iceberg.

2b- How To Fix an Overloaded Dryer 

Luckily, you don’t have to be a DIY expert to fix this problem. Without minimal hassle and zero tools, you can address an overloaded drum by doing the following:

  • Halt the current cycle and unplug the appliance from the wall outlet.
  • Open the door and remove some of the load until there is enough room to insert your hand comfortably. Also, you can refer to the Whirlpool Cabrio Dryer manual for specific recommendations about load size. Remember to distribute the load evenly inside the dryer before checking on the success of this step.

3a- Loose Drum Baffles 

Still puzzled by the persistent screeching noise. It’s time to consider drum baffles as the culprit. These unknown soldiers guide your laundry while the drum spins.

While efficiently tumbling your clothes, these baffles would gradually break free and lose their tightness. Loose baffles lead to a disturbing symphony of squeaks.

The screws holding these tiny baffles in place become loose with frequent heat, age, and rough handling of your Whirlpool dryer.

If one or more of these factors becomes steady in your laundry routine, these baffles may drop dead too.

3b- How to Fix Drum Baffles

Tightening loose drum baffles of a squeaking dryer doesn’t require the whole toolbox. Bring your flathead screwdriver along and follow these steps:

  • Unplug the dryer and remove its front panel.
  • Look inside the drum for tiny plastic parts looking like fins. Focus on the front part.
  • Gently move these fins. If they go along, it’s time to tighten them up.
  • Find the screws holding these baffles and rotate them until they are adequately tight. Don’t overtight to avoid accidental breakage.
  • In the event of visible cracks, you should replace these baffles as per manual instruction.

4a- Malfunctioning Idler Pulley 

Regardless of their models, all dryers come with an idler pulley. This important component guides the drive belt through its rotational course. As with many other parts of your dryer, this pulley gets its fair share of damage or wear and tear. Such scenarios turn this unsung hero into a whining villain.

A bad idler pulley disrupts a tranquil laundry day and causes further damage to the belt. So, you should either DIY fix it or replace it if it’s no longer viable.

When this pulley malfunctions, it usually causes vibrations and shakes accompanying the squeaky symphony. There are three possible causes of a pulley malfunction:

  • Misalignment and increased friction against the belt.
  • Increased heat exposure leads to cracks.
  • Poor cleaning around the pulley creates dust and debris buildup.

How to Change a Belt on A Dryer

4b- How To Fix a Malfunctioning Pulley

While many culprits are making an idler pulley go rogue, you can tackle each of them easily with a proper diagnosis. To identify a problematic pulley, you can do the following:

  • Rotate the drum manually and listen to the accompanying sounds. Grinding noise points to a misaligned pulley.
  • To restore the pulley’s alignment, you should loosen its brackets to easily manipulate its positioning. Use your wrench for this mission.
  • You can use your hands to realign the pulley parallel to the belt.
  • While at it, remove any buildup or gunk in the area and check the condition of the pulley and the belt. Replace either or both of them in cases of visible cracks.
  • A damaged idler pulley will move excessively in response to a gentle wiggle.
  • Retighten the pulley brackets to ensure the pulley remains in its correct position.

Remember to disconnect the Whirlpool appliance from electricity before any of these attempts. Also, remove both the front and rear panels to access the pulley, which is located near the belt at the back of the dryer’s drum.

5a- Inspect The Blower Wheel

Sometimes, squeaks and squeals come from the least expected component. While acting like a fan, whipping hot air within the drum to efficiently dry the damp laundry, this grateful wheel may lose its quietness all of a sudden.

In addition to wear and tear, the blower housing might get overstuffed by foreign objects, lint, or debris.

A visual inspection reveals the exact condition of the blower wheel. If damaged, it shows wrapped or cracked blades.

5b- How To Fix the Blower Wheel

Now, it’s time to unscrew the bolts holding the back panel in place. The wheel resides at the bottom of the dryer’s back part, right behind the vent opening. Once you get a clear view of the wheel and its housing, look for clogs. If present, use your wrench to loosen the wheel’s nuts and take it out of the dryer.

To free the stuck wheel, you can either:

  • Grab your vacuum cleaner.
  • Use a soft brush all over the wheel.

As for damaged blades or physical damage to the wheel, you should opt for a replacement wheel. You can get it from a nearby parts store or an online retailer.

Conclusion

Now that you are equipped with knowledge about some common causes behind your Whirlpool Cabrio Dryer Squeaking mayhem, you can easily restore peace and order to your laundry routine.

DIY troubleshooting of this squeaky opera isn’t just about saving some extra bucks. It’s about a better understanding of your precious appliance and how to keep it in shape for as long as possible.

Remember, your safety is a priority. So, never perform any of these tests or fixes with the dryer hooked to a power source.

Ready to reclaim your quiet Whirlpool Cabrio Dryer? Follow our diagnostic and problem-solving guide once your dryer strikes up a pesky tone.

However, if things become too daunting and overwhelming, it’s never too late to call in for help. A licensed technician will always come to the rescue with the right dryer repair toolkit.

After browsing our detailed Whirlpool Cabrio Dryer squeaking diagnosis and troubleshooting guide, don’t forget to explore our other relevant blog posts below.

Whirlpool Cabrio Dryer AF Code

Whirlpool Dryer Not Heating

Rate this post
DMCA.com Protection Status
error: Content is protected !!