Asko Dishwasher Not Drying: 6 Easy Ways To Fix It Now

You might be wondering why this is happening and what you can do to resolve the problem.

In this article, we will explore some of the common reasons behind an Asko dishwasher’s failure to dry dishes and potential solutions for each issue.

A well-functioning dishwasher cleans your dishes and dries them after the washing cycle.

However, when your Asko dishwasher fails to dry, it could be due to several factors, including vent fan motor issues or the absence of a rinse aid.

By addressing these problems, you can help your dishwasher return to its optimal performance and save time and effort on hand-drying your dishes.

Why is Your Asko Dishwasher Not Drying?

There could be multiple causes for your Asko dishwasher not drying dishes properly.

Let’s explore some of those reasons and see what you can do to fix them.

1. Vent Fan Motor Issue

Some dishwashers, including Asko models, have a vent fan motor to help with the condensation drying process at the end of the cycle.

If this fan motor is not functioning properly, your Asko dishwasher won’t be able to effectively dry the dishes.

To determine if the fan motor has failed, test the motor for continuity and consider replacing it if necessary.

2. Heating Element Malfunction

The heating element is a vital component in the drying process of your dishwasher.

If it’s not working, your dishes will not dry properly.

Check the heating element for signs of damage and test it for proper functioning.

Replace it if required to restore the drying capability of your Asko dishwasher.

3. Rinse Aid Dispenser Issue

Make sure that the rinse aid dispenser, generally located on the interior door next to the detergent dispenser, is filled.

Rinse aid helps improve drying and prevents water spots on your dishes.

If your Asko dishwasher is running low on rinse aid, refill the dispenser to resolve the issue.

4. Clogged Filter Problem

A clogged filter can obstruct water drainage, which in turn could leave your dishes wet.

Check the filter in your Asko dishwasher and clean it if dirty.

Remove it from the machine (as instructed in the owner’s manual) and thoroughly rinse it under hot water before placing it back.

5. Material Type of Dishes

If only items made from plastic or Teflon remain wet after the dishwasher cycle, there’s no need to worry.

These materials don’t dry like other materials and may require manual wiping or air drying after the cycle.

Pay attention to any unusual noise levels or status light indications, as these may signal a problem with your Asko dishwasher.

By addressing these potential causes, you can ensure your Asko dishwasher dries your dishes effectively.

How to Fix an Asko Dishwasher Not Drying

There are several possible ways to fix your Asko dishwasher if it’s not drying your dishes properly.

To ensure optimal performance, follow these steps:

1. Check the Rinse Aid Dispenser

Make sure that your dishwasher’s rinse aid dispenser is full.

The rinse aid helps to reduce spotting and improve drying by dispersing water from the dish surfaces.

Locate the dispenser on the interior door next to the detergent dispenser and fill it according to the manufacturer’s instructions.

2. Ensure Proper Loading of the Dishwasher

Load your dishes in the dishwasher correctly, as poor loading can result in reduced drying efficiency.

Ensure that water can reach all surfaces of the dishes and allow proper airflow for drying.

Arrange larger items like pots and pans on the bottom rack and smaller items such as plates and cups on the upper rack.

Avoid overcrowding, as this can also affect drying performance.

3. Inspect the Vent Fan Motor

Some Asko dishwashers are equipped with a vent fan motor that helps dry dishes at the end of the cycle.

If your dishwasher isn’t drying properly, you may need to check the fan motor.

Test the motor for continuity using a multimeter.

If the motor has failed or isn’t working, it may need to be replaced.

4. Examine the Heating Element

The dishwasher’s heating element should heat up during the drying cycle to remove moisture from the dishwasher space and tub.

To check if the heating element is working, use a multimeter to test it for continuity.

If it’s not functioning correctly, consider replacing it.

5. Clean the Spray Arm

A clogged spray arm can decrease the dishwasher’s cleaning efficiency.

Inspect the spray arm for clogs or debris and clean it if necessary.

Ensure that the spray arm is spinning freely and is not obstructed, as this can also impact the drying process.

6. Consider Your Detergent Choice

Low-quality dishwasher detergents can adversely affect your dishwasher’s cleaning and drying performance.

Invest in a high-quality detergent that’s specifically made for use in dishwashers.

Following these steps can help your Asko dishwasher achieve better drying results and enjoy spotless, dry dishes.

How to Prevent the Problem

Here are the best ways to prevent your Kenmore dishwasher from not drying again.

1. Keep the dishwasher clean

Regularly cleaning your Asko dishwasher can significantly improve its drying performance.

Remove any leftover food particles and clean the filters to ensure proper water flow during the wash cycle.

A clean dishwasher will improve both the wash and dry cycles and ensure clean dishes at the end.

2. Properly load dishes

To achieve optimal drying performance:

1. Ensure that dishes are loaded correctly.
2. Avoid overcrowding and make sure items don’t overlap each other.
3. Utilize the middle and removable cutlery baskets for smaller items to ensure proper spacing.

3. Use good quality detergent and rinse aid

A low-grade detergent can leave residues on dishes, which can affect the drying performance.

Use a high-quality dishwasher detergent to enhance the washing process.

Also, it’s essential to regularly fill the rinse aid dispenser since it plays a vital role in improving the rinse cycle and, ultimately, the drying cycle.

4. Adjust the rinse level

Ensure your Asko dishwasher’s rinse level is set according to the hardness level of your water.

Adjusting the rinse level according to your water hardness will optimize the drying performance.

5. Use Night mode

Some Asko dishwasher models have a Night mode, which includes a silent drying cycle.

Using this mode can help improve the drying performance by running a gentler and longer dry cycle.

6. Check for obstructions

Inspect the spray arms for any obstructions, such as utensils or plates, that may block the flow of water.

Make sure the spray arm’s holes are not clogged with grease or grime, as this can hinder the wash and rinse cycles.

By following these simple tips, you can enhance your Asko dishwasher’s drying performance and enjoy clean, dry dishes every time.