Have you finished your meal and want some rest? This means you leave the dirty dishes to your Asko dishwasher to take care of them. But instead of sparkling dishes, your machine gives you a stubborn pool of water, unclean dishes, and a flashing Asko dishwasher F11.
Now you must handle a soggy mess and unclean dishes instead of relaxing on your couch. The good news is that this error code is simple to understand and tackle. The F11 error indicates a drainage issue, you’ll focus on the machine’s drain system.
This guide equips you with what you need to find out the causes and DIY solutions for this problem. So, read on!
Before any further exploration of this F11 error, here are a few of the commonly affected Asko dishwasher models:
Built-in Dishwashers
- Asko Dishwasher D3540
- Asko Dishwasher D3541
- Asko Dishwasher D3416
- Asko Dishwasher D3534
- Asko Dishwasher D5443
- Asko Dishwasher D5541
- Asko Dishwasher D5441
- Asko Dishwasher W5081
- Asko Dishwasher W5083
- Asko Dishwasher W5092
- Asko Dishwasher W5095
- Asko Dishwasher W5082
- Asko Dishwasher DFS2581
- ASKO XXI5 Dishwasher
Freestanding Dishwashers (less common)
- Asko Dishwasher Olivia W1
- Asko Dishwasher Olivia W2
- Asko Dishwasher Claudina W1
What Does F11 Mean on My Asko Dishwasher?
The more you know about the Asko dishwasher F11, the more knowledgeable and qualified you become to address it.
- Meaning: The F11 code means a drainage issue. This makes your dishwasher unable to drain the dirty water after a wash cycle. So, a small water puddle remains in the tub after the cycle.
- Safety Feature: This error code acts as a built-in safety net. It prevents the dishwasher from completing the cycle with stagnant water. This action reduces the risk of leaks and property damage.
- Impact on Use: The F11 code gives you incomplete results from the washing cycle. This means the dishes might come out greasy, partially unclean, and wet. Also, water builds up in the tub. Eventually, you won’t be able to run another cycle until the code is cleared.
- Warning Signs: You might hear beeping sounds right before the seeing of the F11 code. Also, you may notice slow drainage, or water pooling at the bottom of the dishwasher.
- Importance of Addressing: Ignoring this code leads to more complex problems. This includes leakage, and damage to the floor, dishes, and dishwasher. Also, an unattended code can cause mold growth within the dishwasher.
What Causes Asko Dishwasher F11 Error?
Dealing with puzzling error codes and unclean dishes is frustrating. However, understanding the causes brings you closer to solutions. Here are a few possible causes behind your Asko dishwasher F11:
1. Problematic Drain Hose
This component is a rubber tube that shows unclean water the way out of the washtub after a wash cycle. Over time, many things can go wrong with this hose. This includes blockages, crushing, and kinks.
Clogs in the drain hose prevent the smooth flow of water out of the dishwasher. The drain hose should be straight without of bends or kinks. The imperfections restrict water flow. If the hose gets pinched or crushed behind the dishwasher, it can slow down the drainage process and efficiency. This eventually leads to the Asko dishwasher F11 error.
2. Faulty Drain Pump
The drain heart of the drainage system. It’s part of the sump area and pumps out the dirty water after a wash cycle. The pump consists of an impeller, motor, housing, and sometimes a sensor. The impeller has rotating blades. These blades rely on the motor to generate power for their motion.
If the drain pump malfunctions due to wear and tear, electrical problems, or a blocked impeller, it won’t be able to remove the water. Any of these issues lead to the Asko dishwasher F11 error.
3. Air Gap Issues
The air gap isn’t a component inside your Asko dishwasher. It’s located on your sink line, more specifically on the hot water line feeding your dishwasher. However, it has a crucial role in ensuring efficient drainage. The air gap prevents contaminated drain water from the sink from flowing back into your clean dishwasher.
If the air gap becomes clogged or malfunctions, it can disrupt the proper drainage process. This results in a flashing Asko dishwasher F11.
4.Water Level Sensor Malfunction
A functional water level sensor contributes to the efficient operation of your Asko dishwasher’s operation. It monitors the water level within the washtub. So, it checks when the dishwasher fills with the appropriate amount for each wash cycle. Also, after each cycle, it ensures the machine drains properly.
If this sensor malfunctions, it won’t detect the water levels accurately. Then, it may send incorrect information about it to the control board. Therefore, the control board interprets the signal as proof of incomplete drainage. Eventually, you will end up with a blinking Asko dishwasher F11 error.
How To Reset Asko Dishwasher F11 Error
This simple fix doesn’t need you to be an Asko dishwasher expert. It is a reboot process that helps your appliance lose minor glitches. In some cases, these bugs are behind your Asko dishwasher F11 situation.
Here’s how to successfully reset your Asko dishwasher:
- Unplug the dishwasher from the outlet or turn its designated circuit breaker off. Don’t just hit the pause or off button from its control panel. complete power cut prevents the appliance from drawing any power.
- Wait for around 5-7 minutes. This pause period allows the control board to discharge any residual power and gives it time to fully reset. Don’t cancel this waiting break.
- Restore power to your washer and check if the code is cleared
If the reset fails to clear the washer’s display, proceed to the following troubleshooting steps.
How To Fix Asko Dishwasher F11 Error
Most Asko dishwasher error codes require professional intervention. However, some causes behind this Asko dishwasher F11 error can be tackled with some simple DIY fixes. Here’s how to properly address this code:
1. Fix a Problematic Drain Hose
Look for this hose located at the bottom part of the dishwasher’s back. it’s a flexible, corrugated rubber tube about an inch in diameter that connects the wash tub to the drainpipe under your sink. Ideally, this hose should appear smooth and free of visible damage or cracks.
If you suspect a clogged hose, bring this list of tools and get to work:
- A bucket
- A pair of pliers
- A piece of dry cloth
- Unplug the washer from the power outlet and shut the water inlet valve for safety and protection against water spillage.
- Use your pliers to loosen the hose clamp that secures the drain hose connection to the dishwasher.
- Detach the hose, straighten it out, and inspect it for blockages.
- If you find blockages, use a long, thin object like a straightened wire hanger to carefully remove them. Alternatively, pour hot (not boiling) water through the hose to dislodge any greasy buildup.
- While at it, find the drain filter and clean it. It is a small cylindrical plastic mesh piece in the bottom front part of the dishwasher.
- If the hose is severely clogged or cracked, replace it with a new one. Secure the new hose with the original clamp.
2. Fix a Faulty Drain Pump
Most drain pump issues require calling in the pros. However, you can try some simple DIY fixes before seeking professional help. Before attempting any repairs, make sure to disconnect the washer from power. Now bring your toolkit and get to work:
- Look for the pump assembly at the back of the dishwasher’s base.
- Use your screwdriver to remove the screws securing the lower front panel of the dishwasher to access the assembly.
- Check the impeller for blockages. Remove them using tweezers.
- If there are broken, misaligned, or damaged blades, consult a technician for repair or replacement options.
- If you have advanced electrical knowledge, use a good multi-tester to test the pump for continuity.
- If you don’t have such knowledge, call a professional technician. It’s safer than troubleshooting complex parts at your own risk.
3. Fix a Air Gap Issues
Troubleshooting air gap issues is not complicated. There are no other components or panels to remove to find this component. If your kitchen has an air gap, it would be located on the countertop near the faucet. It is that small device located at the connection point where the hot water line connects to your dishwasher.
Now that you’ve found the component, here’s what to do:
- Remove the air gap cover to check for clogs.
- Use a small brush to clean out any debris.
- Flush it with warm water and white vinegar mix.
- If this approach doesn’t solve the problem, contact a plumber to replace the air gap.
4. Fix a Water Level Sensor Malfunction
Addressing the water level sensor issues require solid electrical practice. Also, you will need to remove the lower dish rack and the bottom panel of the washer. So, there is a level of disassembly required for troubleshooting this component. If you are uncertain of your ability to handle this matter efficiently, seek additional help.
If you know how to disassemble and assemble an Asko dishwasher, you can proceed with safe practices in mind.
- Unplug the appliance like you did in the previous steps.
- Remove the front bottom kickplate to find the sensor.
- Look for a small, cylindrical device attached to the side or bottom of the tub.
- Inspect it for any visible signs of damage or corrosion. Also, remove stuck debris in the sensor’s area. In some cases, forgotten buildup might interfere with the sensor’s function.
- Clean the sensor using a soft cloth or brush to remove any debris or residue.
- Check for loose connections between the sensor and its wiring harness. If you notice looseness, make sure to tightly reconnect the sensor with its harness.
- Use a multimeter to test the sensor. But don’t perform a continuity test without previous experience. Improper use of these tools gives an incorrect diagnosis of the sensor’s statue.
- Replace the sensor if the test proves it’s malfunctioning or have it replaced by a pro.
Conclusion
Don’t let the Asko dishwasher F11 error stand in your way of having clean and sterile dishes. The error indicates a drainage problem, which can lead to unclean dishes, water pooling, and the inability to run another cycle.
The best action to take is understanding the causes behind this error for finding the right solutions. The problem can stem from a problematic drain hose, a faulty drain pump, air gap issues, or a malfunctioning water level sensor.
While some of these causes require direct help from a reliable appliance repair technician, you can apply some of our suggested DIY fixes.
Is your Asko dishwasher not drying probably? Check out this guide to find proper fixes for this common error Asko dishwashers.
FAQ
1. Can I still run my Asko dishwasher if it shows the F11 error code?
No, it’s not recommended. The F11 error indicates a drainage issue, meaning the dishwasher cannot remove dirty water properly. Running it with this error can worsen internal damage, cause water overflow, or lead to mold and foul odors. Always address the issue first before starting a new cycle.
2. How often should I clean the drain hose and filter to prevent the F11 error?
As a general rule, clean the drain filter once every 1–2 weeks and inspect the drain hose every 3–6 months. Regular maintenance reduces the chance of clogs and helps your dishwasher drain efficiently, preventing error codes like F11.
3. Do I need a professional to fix the F11 error, or can I DIY it?
It depends on the cause. Simple issues like a clogged drain hose or air gap can be handled with basic DIY skills. However, if the error stems from a faulty drain pump or malfunctioning water level sensor, it’s safer to contact a certified technician to avoid damaging electrical components or voiding your warranty.
(EMERSON) Asko Dryer Not Spinning: Causes and 5 Ways To Fix It
Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance. He is well-versed in the latest technologies and techniques and is always up-to-date on the latest industry standards.
