An Asko dryer not spinning can be frustrating but don’t worry, you’re not alone.
Many people have faced the same problem with their high-quality Asko appliances and in most cases, it can be resolved with simple troubleshooting steps.
Before panicking or calling a repair professional, take a moment to familiarize yourself with some common reasons why your Asko dryer might have stopped spinning.
One possible reason for your Asko dryer not spinning could be a broken drive belt, which wraps around the dryer drum and is necessary for its rotation.
Another common issue is worn-out drum rollers, which support the drum and allow it to rotate smoothly.
An overheating drive motor or an issue with the incoming power supply could also be the root cause of your dryer troubles.
By having a general understanding of the potential causes of your Asko dryer not spinning, you can feel more confident in diagnosing the issue and determining the necessary steps to resolve it.
Please keep reading to learn more about these issues and their possible solutions.
Why Is Your Asko Dryer Not Spinning
There could be several reasons why your Asko dryer is not spinning.
Below are some common causes and possible solutions to the problem.
1. Clogged Lint Filter
Your Asko dryer may not spin due to a clogged lint filter.
This can restrict the airflow, causing the appliance to overheat and stop spinning.
2. Power Source Issues
It’s essential to ensure that your Asko dryer is correctly connected to a power source and that the circuit breaker has not tripped.
If you suspect a power issue, try unplugging the dryer and plugging it back in or resetting the circuit breaker to see if that resolves it.
3. Faulty Control Panel
The control panel is responsible for initiating the spin cycle.
If it’s malfunctioning, the dryer drum may not spin.
4. Thermal Fuse Issues
The thermal fuse is a safety feature designed to prevent fires caused by overheating.
If your dryer has tripped the thermal fuse, it will likely stop spinning.
In this case, the fuse may need to be replaced.
Remember that continuously replacing the thermal fuse may indicate a more significant issue with your dryer, such as clogged vents or a faulty heating element.
5. Drum Rotation Mechanism Problems
Your Asko dryer is generating heat but not spinning; the issue might be with the drum rotation mechanism.
The lack of drum movement will prevent the effective drying of the laundry.
Check for any obstruction in the dryer and consult a professional for a thorough inspection of the drum rotation mechanism.
How to Fix an Asko Dryer Not Spinning
1. Drive Belt
The drive belt wraps the drum, creating tension between the drive motor pulley and other components.
Over time, with regular usage, the belt can get damaged or break completely.
To fix this issue, reach into the dryer and try turning the drum by hand.
If it spins very quickly, the belt is likely broken.
In this case, you will need to replace the drive belt.
2. Drum Rollers
Worn-out drum rollers can prevent your dryer from spinning correctly.
Remove the belt from the dryer and try turning the drum by hand to check if the support rollers are the issue.
The support rollers may be worn and need replacement if it doesn’t rotate freely.
3. Tension Pulley
The tension pulley ensures that the drive belt maintains proper tension and is another possible cause for your Asko dryer not spinning.
Check the tension pulley for any signs of wear or damage.
If necessary, replace the tension pulley to resolve the issue.
4. Drum Bearing
The drum bearing supports the dryer’s drum and can wear out over time.
The drum bearing may be defective if you notice a squealing or grinding noise.
You must replace the drum bearing to get your dryer working again.
5. Heating Element
A malfunctioning heating element for electric dryers can cause the dryer not to spin.
If the heating element is not working, the dryer will not heat up, which may cause it not to start spinning.
You must either test the heating element for continuity or consult a professional for diagnosis and replacement.
6. Control Board and Motor
The Asko Dryer Control Board and Drive Motor ensure that your dryer spins correctly.
You may have a defective control board or motor if you’ve ruled out other issues.
In this case, it’s best to consult a professional repair service to diagnose and replace these parts.
Always disconnect your dryer from any power source before attempting any repairs.
If you’re unsure about any of these fixes, it’s best to consult an appliance repair professional for assistance.
How to Prevent the Problem
1. Regularly Clean the Dryer Vent
A blocked dryer vent can cause poor air flow and overheating issues, leading the motor to stop working temporarily.
Make sure to clean the dryer vent at least once a year to maintain good airflow, preventing spin problems and extending the life of your Asko dryer.
2. Choose Appropriate Drying Options
Select the suitable drying options for the type of laundry you’re drying.
Your Asko washer’s manual provides guidance on which options to choose.
Using the correct settings will prevent unnecessary strain on the motor, thus avoiding issues with spinning.
3. Avoid Overloading the Dryer
Overloading your dryer stresses the drum drive belt, potentially causing it to break or stretch.
Over time, this may lead to a bad motor.
To avoid these issues, load your Asko tumble dryer with the recommended amount of laundry.
4. Inspect the Drum Drive Belt
Perform regular inspections of the drum drive belt – a slender belt that wraps around the drum – for signs of wear and tear.
Keep it in good condition by replacing it when necessary.
This will ensure that the belt continues to support the drum and facilitate proper spinning.
5. Replace Worn-Out Components
Always check and replace parts of your electric commercial dryer that show signs of wear.
For example, pay attention to the heating coils, roller shafts and Asko dryer drive motor for any signs of damage.
Catching potential problems early can prevent your clothes dryer from stopping mid-cycle.
6. Check Air Flow and Filters
Maintaining proper airflow in your tumble dryer is crucial for its performance.
Clean lint filters and screens regularly to ensure that air can circulate freely.
This will prevent the dryer from overheating, which may cause the motor to stop spinning.
Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance. He is well-versed in the latest technologies and techniques and is always up-to-date on the latest industry standards.
