Dyson V6 Not Holding Charge: 9 Easy Ways To Fix It Now

Is your Dyson V6 not holding a charge? This situation is frustrating because you plan to clean different rooms in your house. The worst thing is that your vacuum cleaner won’t even give you a chance to start. It usually runs out of charge before you know it. 

The first thing that may jump to mind is that the vacuum’s battery is malfunctioning. However, this is not always the case. Many other reasons are making a cordless vacuum, such as Dyson V6 losing its charge quickly.

This includes a damaged power outlet or a clogged filter. Sometimes, the problem might be resolved by simply pressing the reset button. 

Keep reading this blog post so you can get a better understanding of the causes of this issue. Also, we offer reliable troubleshooting steps and fixes for your Dyson v6 that no longer holds a charge

Why is Your Dyson V6 Not Holding Charge?

Typically, you leave your Dyson v6 cordless vacuum to charge for a few hours before getting to the cleaning-up work. So you expect it to last for a couple of hours until you finish all the messy rooms around the house. To your surprise, your Dyson Cordless Vacuum will only last a couple of seconds before its battery drops dead.  

Besides a damaged battery, your vacuum can be experiencing other less serious problems. This includes a malfunctioning charger cable or a blocked air duct. Maybe you haven’t connected the charger correctly. So, the vacuum was not even charging the whole time. 

With so many culprits, it is time to delve deeper into the real causes:

1. Defective Power Outlet

It is common for power outlets to become damaged with frequent use. A non-functional outlet prevents the battery of your Dyson v6 from receiving its proper charge. Over time, the lifespan of the battery will become shortened. You can perform a simple test to ensure the condition of that specific outlet.

Bring another electric household appliance and connect it to the outlet. If it works, then the outlet is in the clear. If not, then it is to blame for this problem. For further investigation, you should inspect this outlet for damage. 

2. Damaged Power Cable 

 A functional power or charging cable feeds the vacuum cleaner with electricity. Electricity won’t channel to your Dyson cordless model if this part malfunctions. Over time, the wires of this cable can become frayed or disconnected. 

In other cases, the charging cable is in good shape but is not connected correctly. In this case, your Dyson v6 won’t flash its blue lights.  

3. Check the Filter 

A filthy filter is a common culprit for a Dyson v6 inability to hold its battery charge. A mesh filter inside a vacuum cleaner is responsible for trapping dirt particles and preventing them from exiting the vacuum and spreading into the air. 

If not cleaned properly, the filter will affect the airflow. It will also affect the vacuum’s performance on many levels, including the charging abilities. 

4. Inspect the Battery Casing 

The battery casing is a whole different component than the battery itself. It resembles a box that keeps outside elements from reaching the battery cells. Being exposed to such elements will eventually ruin the battery. This casing may get damaged over time or with accidental bangs. 

5. Active Turbo Mode 

Turbo mode in a Dyson v6 vacuum is a saver when dusting carpets. It provides increased suction power and faster brushing. However, it is not efficient in terms of battery consumption. It is considered a battery-draining cleaning mode.

The obvious differences between Normal and Turbo modes make the battery drain relatively faster if you accidentally turn it on. You might not notice that this mode is on, as your vacuum model has no LCD screen. 

6. Blocked Airflow 

Whenever something is blocking the airflow of your vacuum cleaner, it will have a decreasing suction power. As the blockage increases and the airflow is fully obstructed, your Dyson v6 will terminate its programs and shut off.

It won’t change anything if the battery is fully charged. Your vacuum won’t operate as expected, and you will immediately suspect its battery. 

7. Using a Motorized Bristle Brush 

A standard roller brush head will not put additional pressure on the battery. However, an improved motorized bristle brush can place such pressure. This automatic brush requires more power to run than a standard roller brush. This is why it might drain the battery faster, especially if the brush is defective.

8. Inspect the Battery 

This should be the last resort. If none of the above-discussed factors was the culprit in the charge loss issue, you should consider the battery. The batteries of cordless vacuums are built to last about 3-5 years. However, they might drop dead earlier with heavy use.

How to Fix a Dyson V6 Not Holding Charge

If your Dyson v6 keeps losing its charge after so much time on the charger, you might consider replacing its battery. In some other cases, other underlying causes are to blame in this situation.

So, instead of throwing away a good battery and not fixing the real issue. You should go the extra mile and investigate further. The good news is that fixing most of the causes is not a difficult task. It is mostly about replacing broken parts or maintaining other components. 

1. Use Another Power Outlet 

If this is the only issue leading your vacuum not to charge, then the solution is pretty simple. All it takes is avoiding that particular power outlet and using another one. This way, your vacuum cleaner will charge properly.

However, this does not mean leaving the damaged outlet as it is. You should contact an electrical to inspect it thoroughly and fix it. For safety purposes, manipulating power outlets is not a thing for all DIYers.

2. Replace the Power Cable

Start with the visual inspection of the cable for damage. You may spot obvious cable kinks and exposed or disconnected wires. Any of these findings call for a replacement cable.

But before rushing to buy a brand-new cable, make sure the cable is connected correctly to the wall outlet. The problem could be fixed by adjusting how it is connected to the power source. 

3. Clean the Filter 

As you probably know, a clogged filter should be cleaned thoroughly to avoid excessive blockage or total replacement. It is important to remove it from the machine per the user manual guide.

Usually, you will need to rotate the filter in the anti-clockwise direction to take it out thoroughly. Check the filter and remove as much buildup as you can. Rinse the filter under running cold water to avoid damage from using hot water. 

4. Replace the Casing 

 This component plays a vital role in preventing battery degradation. It is usually made of high-quality plastic. However, frequent falling or bumping to the ground can affect its efficiency and longevity. Without a functional casing, a battery is prone to damage faster. A cracked casing will be visible.

So, inspect it thoroughly for any signs of damage. If you find any, it is time to get a replacement. 

5. Turn off the Turbo Mode

Turning off the turbo cleaning mode is easy for any average user. You can use the normal settings button with a red trigger on it. Hold that trigger firmly with one hand, and the other should press the maximum power button. Doing these two steps should do the deed and exit this special mode. 

6. Free the Airflow of Blockages 

This step requires a lot of work. You will remove and inspect all its accessories. This includes the nozzle, cleaner head, dirt collector, and hose. You should look everywhere for blockages and remove them completely. After reinstalling these components, the Dyson vacuum should work perfectly. 

7. Use the Standard Brush

If you are certain that a motorized brush drains the battery, it is better to use the regular roller brush. A motorized bristle indeed offers a better brush rotation. However, the battery life should of your Dyson v6 should be your top priority. 

8. Get a Replacement Battery 

You should get a replacement if the battery is fully dead and no longer holds its charge. If a manufacturer’s warranty still covers your Dyson V6, you should not worry about the cost. For vacuums outside the warranty, replacing a battery may exceed $100.  

If you shop for a new battery, you should opt for an original Dyson battery. Otherwise, you will be denied its warranty. 

9. Refer to the Product Warranty 

The warranty period for Dyson vacuums varies. However, you will not find any coverage below a two-year warranty. So, check the model’s warranty and contact customer service for further details. The manufacturer will repair or replace the battery if your vacuum is still covered.  

5/5 - (6 votes)
DMCA.com Protection Status
error: Content is protected !!