A Kenwood dishwasher can make cleaning up after meals a breeze, but when it starts to malfunction, it can quickly become a source of frustration.
One of Kenwood dishwasher users’ most common problems is that the dishwasher does not drain correctly. This can lead to dirty water sitting in the dishwasher and grime and bacteria buildup.
However, there are various alternatives to hiring a professional to resolve this issue. This post will review some easy and efficient strategies for troubleshooting and repairing a Kenwood dishwasher that needs to be emptied.
Why is your Kenwood Dishwasher Not Draining?
A lot of factors can be responsible for the reason why your Kenwood dishwasher isn’t draining. However, in this section, you’ll find some of the most common reasons. If your Kenwood dishwasher isn’t draining, here’s why:
1. Clogged or Blocked Drain Hose
A clogged or blocked dishwasher drain hose is one of the most common reasons why a Kenwood dishwasher may not be draining properly. Over time, food particles, grease, and other debris can accumulate in the dishwasher hose, preventing water from flowing out.
To check for a clogged or blocked drain hose, inspect the hose for any visible signs of damage or debris buildup. If the hose looks clogged, use a long, thin instrument such as a wire hanger or a pipe cleaner to remove the blockage.
2. Faulty or Malfunctioning Drain Pump
The dishwasher drain pump is responsible for removing the water from the dishwasher, so if it is faulty or malfunctioning, this can cause the dishwasher not to drain properly.
To check if the drain pump is the issue, you can listen for any unusual sounds from the dishwasher during the drain cycle, as this may indicate a problem with the pump.
You may also check the pump for visual signs of corrosion or wear and tear. If the pump is damaged, it will likely need to be replaced.
3. Damaged or Worn Out Drain Basket
The drain basket, also known as the filter, helps to prevent large food particles and debris from entering the drain pump and causing blockages. If the drain basket is damaged or worn out, it may not be able to effectively filter out these particles, which can cause the dishwasher not to drain properly.
To check for a damaged or worn-out drain basket, you can inspect the basket for any visible signs of damage or wear and tear. If the basket is damaged, it will need to be replaced.
4. Malfunctioning Float Switch
The float switch detects the water level in the dishwasher and signals the drain pump to begin draining water when the level becomes too high. If the float switch fails, the dishwasher may not be able to detect the water level precisely, causing it not to drain properly.
To check for a malfunctioning float switch, inspect the button for any visible signs of damage or wear and tear. If the switch is damaged, it will need to be replaced.
5. Clogged Garbage Disposal Unit
If your Kenwood dishwasher is connected to a garbage disposal unit, a clog or blockage in the disposal can prevent water from draining out of the dishwasher.
To check for a clogged garbage disposal unit, inspect the disposal for any visible signs of debris buildup or blockages. If you find a clog, you can try to remove it using a plunger or a plumbing snake.
Identifying the root cause of the problem is essential to fix the issue effectively. By checking these potential causes and troubleshooting accordingly, you should be able to get your Kenwood dishwasher draining.
How to Fix a Kenwood Dishwasher Not Draining
Here are some ways to fix a Kenwood dishwasher that is not draining:
1. Clear any blockages in the drain hose
Disconnect the drain hose from the dishwasher, sink, or garbage disposal unit.
Check for any visible blockages and remove them. If you can’t see the blockage, you can use a long, thin object like a wire hanger or pipe cleaner to clear the blockage from the hose gently. Reconnect the hose and run a cycle to check if the dishwasher is draining properly.
2. Check and clean the drain basket.
The drain basket, also known as the filter, is usually located at the bottom of the dishwasher.
Remove the basket and check for any visible damage or wear and tear. If it is damaged, replace it. Clean it thoroughly under running water if it is just clogged with debris. Reinstall the basket and run a cycle to check if the dishwasher is draining properly.
3. Inspect and replace the drain pump.
The drain pump is located at the bottom of the dishwasher and can usually be accessed by removing the kick plate at the front.
Check for any visible damage or wear and tear. If it is damaged, replace it. Before replacing the pump, turn off the power to the dishwasher. Once the pump is replaced, run a cycle to check if the dishwasher drains properly.
4. Check and replace the float switch.
The float switch is located in the dishwasher’s tub and can usually be accessed by removing the bottom rack.
Check for any visible damage or wear and tear. If it is damaged, replace it. Before replacing the switch, make sure to turn off the power to the dishwasher. Once the switch is replaced, run a wash cycle to check if the dishwasher drains properly.
5. Check and clear any clogs in the garbage disposal unit.
If the dishwasher is connected to a garbage disposal unit, check the disposal for any visible clogs or blockages.
Remove the clog using a plunger or a plumbing snake if you can see it. If the clog is deeper in the disposal unit, you may need to disassemble and clean it thoroughly. Once the disposal is clear, run a complete wash cycle to check if the dishwasher drains properly.
6. Clean the dishwasher
Remove any debris or food particles from the dishwasher’s tub and spray the arm using a soft brush or a toothbrush to clean the dishwasher.
Place a cup of white vinegar or a dishwasher cleaner in the bottom of the dishwasher and run a cycle on the hottest setting. This will help to remove any buildup or residue in the dishwasher, which can cause drainage issues.
In conclusion, by following these steps, you should be able to fix your Kenwood dishwasher’s drainage issues. However, if the problem persists, contacting a professional for your dishwasher repair may be best.
FAQs
Why is there standing water in the bottom of my dishwasher?
Here are some of the reasons why there might be standing water in the bottom of your dishwasher:
The water inlet valve is not working: The water flow into the dishwasher is controlled by the water inlet valve. If it’s not working properly, it can prevent water from flowing into the dishwasher or allow water to flow into the dishwasher but not drain out.
The drain pump is not working: The drain pump is in charge of removing water from the dishwasher. If it’s not working properly, it can prevent water from draining out of the dishwasher or allow water to drain out of the dishwasher but not pump it into the sink.
The drain hose is clogged: The drain hose is the pipe that connects the dishwasher to the sink. If it’s blocked, it can prevent water from draining out of the dishwasher.
The drain pan is damaged: The drain pan is the tray under the drain hose. Water might flow out of the dishwasher and onto the floor if it is broken.
There is a leak in the dishwasher: There could be a leak in the dishwasher itself, which could cause water to accumulate in the bottom.
If you need clarification about what is causing the problem, it is always best to consult an appliance specialist.
Adrian is an ISCET licensed professional that has completed the National Appliance Service Technician Certification Exam and has the expertise to diagnose and repair any appliance. He is well-versed in the latest technologies and techniques and is always up-to-date on the latest industry standards.
