LG Dishwasher OE Error: Causes & 10 Ways To Fix It Now

If you own an LG dishwasher, you may have encountered the frustrating OE error at some point. 

This error can prevent your dishwasher from completing its cycle and leave your dishes dirty and unwashed. But don’t worry; this article will explore the causes of the LG dishwasher OE error and provide practical ways to fix it. 

Whether you’re experiencing this error for the first time or you’ve encountered it before, keep reading to learn how to get your LG dishwasher running smoothly again.

LG Dishwasher OE Error
The main cause of LG Dishwasher OE Error Code is a drain issue. This is typically caused by food debris or an installation issue, such as a kinked drain hose or clogged drain filter. When the dishwasher detects that water is not draining properly, it triggers the OE error code. 

What causes LG Dishwasher OE Code?

When a dishwasher displays an OE error code, it indicates that the unit has detected a drain issue. There are several causes of this error code. They include:

1. Washing Machine Installation Issue 

A dishwasher may display an OE error code if not installed properly. If the drain hose is not installed correctly, it can result in an OE error code.

2. Kinked Drain Hose

A kinked drain hose is one of the most common causes of an OE error code in LG dishwashers

If the drain hose gets bent or twisted, it can restrict the water flow out of the dishwasher and cause an OE error code.

3. Drain Issue 

A dishwasher may display an OE error code if there is a problem with the drain. The drain may be clogged with food debris or other objects, or there may be a problem with the drain pump.

4. Drain Filter

If the drain filter is clogged with food debris, it can restrict the water flow out of the dishwasher and cause an OE error code.

5. Food Debris

Food debris can accumulate in the dishwasher and cause an OE error code. Removing large food debris from the dishwasher before running a cycle is essential.

6. Malfunctioning Components 

Malfunctioning components like the drain pump or valve can cause an OE error code. If any of these components fail, they will need to be replaced.

It is essential to troubleshoot the above issues to resolve the OE error code. 

How to Fix LG Dishwasher OE Code

An OE error code on an LG dishwasher’s display shows that the unit has detected a drain issue, often resulting from food clogs or an installation issue. Here are some steps to follow to fix LG dishwasher OE error codes:

1. Inspect for Food Debris

If you find any food debris in your dishwasher’s tub, remove larger food debris and items that may not wash out. Secondly, Perform maintenance activities, which include cleaning the filters, cleaning the spray arms, and running a maintenance cycle.

After cleaning the dishwasher, try running a standard or heavy-duty cycle with no dishes or detergent. This will flush the unit as well as test the drain function.

2. Wash the Filter

Cleaning the filter is essential to ensuring that your dishwasher runs smoothly. Begin by removing the lowest rack of your dishwasher to clean (or wash) the filters.

 The filter can be found below the long spray arms under the rack.

3. Inspect the Drain Hose

If the drain hose is kinked, the dishwasher will not drain properly. To avoid kinks, inspect and adjust the drain hose.

Look for a ridged or corrugated hose under the sink. It will be white, translucent, or gray. Check to see if anything has been pushed against or on top of the hose, causing it to become pinched or kinked.

Run a test cycle after straightening the hose.

4. Inspect the Air Gap

The OE error code is triggered when the dishwasher is not draining properly. Check the drain air gap or in-sink disposal for debris and clogs.

Check the knockout plug to see if the dishwasher has a new garbage disposal installed.

5. Force the Drain

Check the control panel for the CANCEL & DRAIN option to perform a drain only. This is activated by pressing and holding two buttons, e.g., DELICATE + DUAL CONTROL. The two buttons may vary depending on your model.

If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off. The first 45 seconds of any cycle is drain only.

6. Check the Wash Cycle

Sometimes, the wash cycle is too short, resulting in the dishwasher not fully draining. Check the wash cycle to ensure that it’s running for the proper length of time.

7. Check the Drain Pump Filter

The drain pump filter can be found at the bottom of the dishwasher, and it can become clogged with debris. To clean the drain pump filter, unplug the dishwasher and remove the lower front panel to access the filter.

Turn the filter counter-clockwise to remove and clean it with warm water and a soft brush. Re-install the filter and the front panel and plug in the dishwasher.

8. Check the Drain Pump and Motor

 If the drain pump filter is clean, but the dishwasher still won’t drain, check the drain pump and motor for any damage or malfunction.

 If the pump or motor is damaged, it may need to be replaced.

9. Check the Control Panel

If all of the above steps fail to fix the OE error code, check the control panel for any error codes or malfunctions. Refer to the dishwasher manual for troubleshooting tips specific to your model.

If the control panel is malfunctioning, it may need to be replaced.

10. Request a Repair

If you try all the options above and the OE error code displays again, the unit will require a repair service.

How To Prevent LG Dishwasher OE Error Code

Following some simple maintenance and usage guidelines is vital to prevent LG Dishwasher OE Error Codes from occurring.

1. Proper Loading 

Ensure that dishes are correctly loaded and not blocking the dishwasher’s spray arms. Overloading the dishwasher can lead to incomplete cleaning, resulting in food debris clogging the dishwasher’s filters and drain.

2. Pre-Rinse Dishes 

Before loading dishes into the dishwasher, it is recommended to rinse off any large food particles. This will help prevent food debris from clogging the dishwasher’s filters and drain.

3. Regular Cleaning 

Clean the dishwasher’s filters and drain pump filter regularly. This will help prevent the accumulation of food debris that can clog the dishwasher’s drain system.

4. Use the Correct Detergent

Use only dishwasher detergent that is recommended for your LG dishwasher model. Using the wrong type of detergent or too much detergent can result in suds and blockages in the dishwasher’s drain system.

5. Run Hot Water

Before starting a wash cycle, run the hot water at the kitchen sink until it is hot. This will help ensure that the dishwasher starts with hot water and will help dissolve detergent and food debris.

6. Use the Appropriate Wash Cycle 

Use the appropriate wash cycle for the type of load being washed. For example, use a heavy-duty wash cycle if the load contains heavily soiled dishes.

7. Check Drain Hose and Connections 

Check the dishwasher’s drain hose and connections for kinks or blockages. Straighten out any kinks and ensure that the connections are secure.

By following these simple maintenance and usage guidelines, you can help prevent LG Dishwasher OE Error Codes and ensure that your dishwasher operates at peak performance.

5/5 - (6 votes)
DMCA.com Protection Status
error: Content is protected !!