Maytag Washer Stuck on Spin Cycle: 7 Ways To Fix It Now

We’ve all experienced when your Maytag washer gets stuck on the spin cycle, leaving your clothes sopping wet and potentially damaging your machine.

This issue can be both frustrating and worrisome, and understanding what causes it can help prevent it in the future.

In this article, we’ll explore the reasons behind a stuck spin cycle and provide practical tips on how to address the issue.

From load balancing to cycle settings, we’ll guide you through quick and easy ways to get your washer running smoothly again.

Whether you’re a seasoned washer user or a laundry novice, our information will help you save time and protect your investment in your Maytag washer.

Why Is Your Maytag Washer Stuck on Spin Cycle?

Unbalanced Load:

An unbalanced load is one common reason your Maytag washer might be stuck on the spin cycle.

The washer may have difficulty spinning properly when the laundry isn’t evenly distributed in the wash basket.

To fix this issue, simply redistribute the clothes in the basket so they are balanced.

In the future, make sure to spread out the load evenly when adding clothes to the washer to prevent this problem.

Bulky Items:

Washing bulky items, such as blankets or large towels, can cause the washer to become stuck on the spin cycle.

Try washing bulky items separately or with a smaller load of similarly sized items to avoid this issue.

This will help ensure the washer can properly handle the weight and maintain balance during the spin cycle.

Faulty Drain Pump:

A faulty drain pump can also cause your Maytag washer to remain stuck on the spin cycle.

This issue typically occurs if the pump is clogged with debris or becomes damaged.

To resolve this, check the drain pump for any clogs or damage, and if necessary, replace it with a new pump.

Motor Coupling:

The motor coupling is an important component that connects the motor to the transmission.

If this coupling is damaged or broken, it can result in your washer getting stuck on the spin cycle.

Inspect the motor coupling for any signs of wear and tear and replace it if necessary.

Control Board issues:

The control board in your washer regulates the cycles and operations of your appliance.

A faulty control board may cause your washer to be stuck on the spin cycle.

Suppose you suspect this to be the issue. In that case, it’s best to consult a professional technician or contact Maytag support for further assistance, as replacing a control board can be a complicated task.

Error Codes:

Some Maytag washers may display error codes when they encounter a problem during a cycle.

If your washer is stuck on the spin cycle and an error code is displayed, consult your user manual or Maytag support to identify the issue and follow the recommended troubleshooting steps.

Power Surge:

In rare cases, a power surge can cause cycle problems in your washing machine.

If you’ve recently experienced a power outage or surge in your home, try unplugging your washer, waiting a few minutes, and then plugging it back in to see if it resolves the issue.

If not, you may need to contact a professional technician for further assistance.

By being aware of these potential causes and solutions, you can take the appropriate steps to troubleshoot and resolve any issues with your Maytag washer’s spin cycle.

How to Fix a Maytag Washer Stuck on Spin Cycle

1. Check for an Unbalanced Load

An unbalanced load is one common reason for a Maytag washer stuck on the spin cycle.

This occurs when the laundry is not distributed evenly in the wash basket.

To fix this issue, redistribute the contents of the washer to ensure a balanced load.

This will help the washer run smoothly and prevent it from getting stuck in the spin cycle.

2. Inspect and Tighten the Drive Belt

The drive belt is essential for the spin cycle, connecting the motor to the drum.

A loose or damaged drive belt can cause the washer to get stuck on the spin cycle.

To fix this, turn off the washer and unplug it from the power source.

Then, examine the belt and replace it if needed.

If the belt is in good condition, ensure it’s tight and properly connected to the drum and motor.

3. Examine the Wash Plate

The wash plate in your Maytag washer is responsible for agitating the clothes during the wash cycle.

If damaged or worn, it may not work efficiently, causing the washer to get stuck on the spin cycle.

To resolve this issue, inspect the wash plate and replace it if it is damaged or worn.

4. Repair or Replace the Launch Button Clip Path

The launch button clip-path is responsible for starting and stopping the washer when the door is closed.

The washer may get stuck on the spin cycle if it’s damaged or malfunctioning.

A qualified technician should inspect and repair or replace the clip-path if necessary.

5. Inspect the Water Inlet Valve and the Flow of Water

The water inlet valve controls water flow into your washer during the wash cycle.

If it’s malfunctioning or clogged, the washer may get stuck on the spin cycle due to an insufficient water supply.

Check the water inlet valve and flow to ensure they are working correctly.

If necessary, clean or replace the water inlet valve.

6. Ensure Proper Cycle Speed and Cycle Ad Lid Lock

The correct cycle speed is essential for your washer to function correctly.

The cycle and lid lock also prevent the washer from operating if the lid is open.

Ensure that the washer is set to the correct cycle speed and that the cycle and lid lock function properly.

7. Consult a Qualified Technician

If you cannot fix the problem yourself or are unsure about the specific issue, it’s best to consult a qualified technician.

They can diagnose the problem, perform repairs, or recommend the appropriate course of action for your Maytag washer.

By following these steps, you should be able to troubleshoot and resolve most issues that cause a Maytag washer to get stuck on the spin cycle.

Always unplug your washer before attempting any repairs and follow the manufacturer’s guidelines for your specific model.

How to Prevent the Problem

To prevent your Maytag washer from getting stuck on the spin cycle, you can follow these suggestions:

Load Size

Be mindful of the load size you place in your washer.

Overloading or underloading the washer can lead to an unbalanced load, causing the machine to get stuck in the spin cycle.

Try to distribute the laundry evenly and follow the manufacturer’s guidelines for load size.

Excess Detergent

Too much detergent can cause excessive suds, which can interfere with the washer’s ability to spin properly.

Follow the detergent manufacturer’s recommendations for the appropriate amount based on your load size and washer type.

Washer Legs

Ensure your washer is level on the floor, with all legs touching the ground.

An uneven washer can cause the load to be unbalanced, resulting in a stuck spin cycle.

For a Maytag coin-operated washer or any other model, make sure the legs are aligned and tightened.

Washer Tub

Regularly clean your washer tub to prevent buildup of debris or detergent residues.

This can help your machine maintain optimal performance during the spin cycle.

Consult your washer’s user manual for specific instructions.

Control Panel and Indicator Light

Become familiar with your washer’s control panel and indicator lights.

Use the washing options menu to select the appropriate settings for your load, including maximum spin speeds, slow spin, or rapid wash options as needed.

Consult your user manual for guidance if you see an unusual indicator light.

Lid Switch

Occasionally inspect the lid switch for proper operation.

The lid switch should cause the washer to stop spinning when the lid is opened.

If your washer continues to spin with the lid opened, the lid switch may need to be replaced or serviced.

Proper Installation

Finally, ensure your washer is properly installed, with the power cord securely plugged in and the access panel in place.

Following proper installation guidelines can help prevent issues that may cause the washer to become stuck on the spin cycle.

By paying attention to these preventative measures, you can minimize the occurrences of your Maytag washer getting stuck on the spin cycle and keep your laundry routine running smoothly.

5/5 - (5 votes) Protection Status
error: Content is protected !!