Samsung Washer Stuck on Spin Cycle: 8 Ways To Fix It Now

A Samsung washer stuck on the spin cycle can be frustrating and time-consuming.

When this issue arises, it means your clothes won’t be able to dry off completely, leaving you with damp laundry and potentially creating more work for you when it comes to finding alternative drying solutions.

This problem may seem daunting at first, but with a bit of knowledge, you can address the issue confidently.

Several factors could cause a Samsung washer to get stuck on the spin cycle, ranging from improper installation or balancing to unbalanced loads of laundry.

Understanding these potential causes not only empowers you to find the source of the problem but also helps you prevent any future occurrences.

In this article, we will explore the common reasons a Samsung washer becomes stuck on a spin cycle and provide helpful solutions for each scenario.

By identifying the cause and implementing the appropriate fix, you can get your washer back to running efficiently and effectively.

Why Is Your Samsung Washer Stuck on Spin Cycle?

Suspension Springs

One possible cause for your Samsung washer becoming stuck on the spin cycle could be damaged or worn-out suspension springs.

These springs play a crucial role in stabilizing the washer drum during the spinning process.

If the springs have weakened over time or have become damaged, the washer drum may become unstable, leading to the spin cycle issue.

Spinning Issue

Another potential cause for a stuck spin cycle is an internal spinning issue with the washer itself.

This problem may come from various factors, such as a malfunctioning control board, faulty sensors, or even damaged motor components.

Any of these issues could lead to a spin cycle that never ends or becomes stuck at a particular time.

Washer Drum

A loose or damaged washer drum could also be the culprit for a stuck spin cycle.

When the drum is not securely attached or properly balanced, it might cause the washer to get stuck on the spin cycle.

Check for any loose nuts or screws that could be causing the drum to shift during operation and tighten them if necessary.

Unbalanced Load

An unbalanced load of laundry can contribute to a Samsung washer getting stuck on the spin cycle.

If you’re washing a single item or a small number of items with one heavier (when wet) item, this can create an imbalance during the spinning process.

The washing machine will automatically try to balance the load by moving the laundry around, but if the load remains unbalanced, the washer may eventually stop the cycle altogether.

To avoid this problem, try to distribute your laundry evenly in the drum and avoid mixing very heavy items with lighter ones.

Spin Cycle

Sometimes, the spin cycle itself could be the root of the problem.

If the washer’s cycle settings are not correctly configured or if there is a software glitch, the spin cycle can become stuck, and the washing machine may not function as expected.

In such cases, diagnosing and resolving the issue might involve updating the software or fixing the specific cycle setting causing the malfunction.

How To Fix A Samsung Washer Stuck on Spin Cycle

1. Check your user manual.

First, refer to your Samsung Washer user manual for specific troubleshooting tips related to your washer model.

There might be a specific issue or code on display that tells you what the problem is.

2. Ensure proper installation and balancing.

Improper installation or an unbalanced load can cause washer issues like getting stuck on the spin cycle.

Make sure your washer is level and properly installed, and avoid overloading the machine.

Adjust the load distribution if necessary.

3. Examine the drain filter.

A clogged drain filter may cause your washer to get stuck in the spin cycle.

Check the drain filter and clean it if necessary.

Refer to your washer manual for instructions on locating and cleaning the drain filter.

4. Inspect the washer motor.

A faulty motor can prevent your washer from completing its spin cycle.

Check for a properly functioning motor and replace it if necessary.

You may need a professional technician’s assistance to handle this task.

5. Check the water level sensor.

A faulty water level sensor can cause the Samsung Washer to not register that excess water has been removed, leading it to continually spin.

Inspect and replace the water level sensor if needed.

6. Verify power supply

Ensure your washer is connected to a stable power source and the power cord is in good condition.

Power surges can cause control panel issues, which result in the washer getting stuck in the spin cycle.

A power button reset or a reset switch may help clear any errors.

7. Examine the drain hose and drain pipe.

Ensure the drain hose is properly connected, without kinks, and not clogged.

A slow drain or blocked drain pipe can cause the washer to remain in the spin cycle.

You might need to clean the drain pipe or ensure it is leveled properly.

8. Inspect shock absorbers

Worn shock absorbers can cause the drum to become unbalanced, leading to the washer getting stuck in the spin cycle.

Examine the shock absorbers and replace them if they are worn or damaged.

How to Prevent the Problem

To prevent your Samsung washer from getting stuck on the spin cycle, you can follow these tips:

Check Water Supply Hoses

Regularly inspect the water supply hoses for any damage, kinks, or leaks.

Replace them if necessary, as this will ensure proper water flow and prevent issues with the rinse and wash cycles.

Choose the Correct Cycle and Detergent

Select the correct cycle for your type of laundry and use the recommended amount of detergent for your washing machine.

Overloading the washer with detergent may create excessive suds that can interfere with the proper functioning of the machine.

Properly Load Your Washer

Ensure that you are evenly distributing clothes inside your Samsung washer.

An uneven load may cause the washer to become unbalanced, leading to problems during the spin cycle.

Avoid overloading the washer and mixing heavy items with light ones, as this can also lead to an uneven load.

Clean Filters Regularly

Regularly clean the debris, mesh, and pump filters to prevent clogs that can cause the washer to get stuck on the spin cycle.

A clogged filter may affect the washer motor and its performance.

Know Your Washer Model

Different types of washing machines have different features, so make sure you are familiar with your specific Samsung washer model.

This will help you troubleshoot and prevent washer issues efficiently.

By following these tips, you can reduce the likelihood of your Samsung washer getting stuck on the spin cycle and ensure smooth functioning for years to come.

5/5 - (7 votes) Protection Status
error: Content is protected !!