Midea is a great home appliance brand that you can trust to deliver time and time again on well-performing products, and a Midea dishwasher is no exception. However, no matter what brand, every appliance will occasionally have problems and won’t last forever.
If you’re wondering what common problems you might run into when you purchase a Midea dishwasher, this article will tell you everything you need to know – as well as how to solve those problems.
Keep reading to get the complete guide on your dishwasher, the problems it might present, and what you can do to get it working again.
The Most Common Problems With a Midea Dishwasher
Here are some of the most common problems experienced by Midea dishwasher users:
1. Dishwasher Won’t Start
The first and most common problem you might run into is your dishwasher not starting at all. If your appliance does not start a cycle when you push the start button, there could be a few issues causing the problem.
This is likely a power supply issue or a problem with the door latch not locking. To solve the problem, start by checking the power supply to ensure that everything is connected and that your outlet is functional; you can also check whether you have enabled child look on your appliance.
If all is in order, examine the door latch mechanism on your dishwasher to assess whether anything is blocking it or if the mechanism itself has any damage or wear that might be preventing it from locking. If there is an issue, you must have this assessed and repaired by an appliance technician.
2. Dishwasher Not Cleaning Properly
Perhaps your dishwasher turns on and runs, but it doesn’t clean your dishes properly, leaving you with grease or food residue on your plates even after a full wash cycle. If this happens, there might be an issue with the spray arm, the soap dispenser, the inlet valve, or even the detergent you’re using.
To figure out what’s going on, all you need to do is perform a few checks, starting with the spray arm, which is the most likely culprit. Make sure it hasn’t been obstructed by any large items, and check that the spray holes aren’t clogged; this component can be removed to clean with soap and warm water.
Next, you can check the inlet valve to ensure sufficient hot water can enter your dishwasher. If this valve is blocked or there are any other issues, address them before running your dishwasher again.
Finally, check that your soap dispenser isn’t blocked from releasing your detergent. Remember that using a low-quality detergent might also result in dirty dishes; opting for a different brand is recommended if you think this is the issue.
3. Stopping Mid-Wash
If your dishwasher tends to stop halfway through its washing cycles, it can be incredibly frustrating. This has a few potential causes, including an issue with the water supply, a faulty door latch, or even a control board fault.
The first thing you need to do in this situation is to examine the door latch, as mentioned before.
Next, you can inspect the water inlet valve, the water supply hose, and any other areas or components related to the water in your dishwasher. If you notice anything preventing water from entering (or exiting) your appliance, address the problem immediately.
If neither seems to be the problem, it might be a control board issue. You can try to reset the appliance by unplugging it from the power source and then plugging it back in again; however, if this doesn’t help, contact an appliance technician or a repair company.
4. Dishwasher Not Heating Up
You might also have trouble with your dishwasher not dispensing hot water onto your dishes during a wash. Heating water is an integral part of your appliance’s functionality, so you’ll need to address this issue if you want clean dishes that are free of bacteria.
Faulty heating elements are typically the cause of this problem. Otherwise, as mentioned above, you might have a problem with your control board or a broken temperature sensor.
All these components play a role in getting the water temperature correct, so if one is faulty, it might need to be repaired or replaced. Check out each of these parts for damage or wear, but if you aren’t particularly handy, it’s advisable to contact an appliance technician.
5. Dishwasher Leaking
A widespread problem with dishwashers of all kinds is leaking. When an appliance uses water, a lot can go wrong! You might have a clogged filter, a damaged door seal, a leaking hose, or even an overloaded machine.
One of the most common causes of this issue is the door seal, so you should check this first – especially if you notice dirty water leaking out of the bottom of your dishwasher. If there’s any damage or wear on the seal, you’ll need to replace it.
You’ll also want to check the drain hose and other connections, such as the inlet valve hose, drain pump hose, and the different areas where water enters and exits can become loose or damaged, meaning water can leak out. Check all these areas and replace them or repair any issues you notice.
6. Dishwasher Not Draining
On the other hand, your dishwasher might have an outlet problem. You’ll be able to notice this quickly if there is excess water in the bottom of the appliance after a wash cycle.
This is typically the result of clogging – either in your filter, hose, or pump.
Check each of these components for a clog or a build-up of dirt and grime. Make sure to remove any obstructions and give each component a thorough clean with warm, soapy water before returning them to their positions.
If this doesn’t solve your issue, it’s recommended that you consult a professional technician.
7. Door Latch Not Locking
If the door latch isn’t working correctly, you’ll need to assess what component isn’t working and determine whether it can be repaired or needs replacing. If you don’t feel confident here, it’s best to get help from an experienced professional.
8. Dishwasher Buttons Not Working
If the buttons on your appliance aren’t working, you might have a faulty control board, a broken display, a damaged keypad, or even a simple power supply issue. The first thing to check is that your power supply is properly connected and in working order.
If there are no connection issues, you’ll want to check out the control board and display by accessing them via the panel in your appliance.
This will require you to dissemble certain dishwasher components, which means you need to unplug it first – but don’t hesitate to get professional help if you’re unsure what to do.
9. Dishwasher Making Strange Noises
Sometimes, our appliances might make strange, loud, or excessive noises that put us on high alert. Numerous different issues can cause a noisy dishwasher, and it can be tough to pinpoint what the problem is.
Strange noises are usually indicative of another issue that has most likely been discussed above – assess your dishwasher for any other symptoms that might help you determine what’s causing the noise.
If you’re unsure, it’s best to get professional help before rerunning the appliance to prevent further damage or potential safety hazards.
10. Error Codes
Finally, keep in mind that your dishwasher might display error codes that will help you diagnose and understand problems and faults. Here are some of the common codes to look out for on your Midea dishwasher:
- E1: Water inlet error.
- E2: Drain pump motor error.
- E3: Heater assembly error.
- E4: Water leakage error.
- Ed: Communication failure.
Midea Dishwasher Problems: Are They A Deal-breaker?
All dishwashers present problems from time to time, but this doesn’t have to be a deal-breaker for the product!
All these issues discussed above are common problems and not an actual defect with the dishwasher or manufacturer. As you can see, they’re also easy to diagnose and simple to solve.
Most of these issues can be avoided if you use your dishwasher with care, follow the correct use in the instructions manual, use a high-quality detergent, and schedule regular maintenance for your appliance.
Remember that home repairs can be dangerous if you’re not confident in your knowledge and abilities, so don’t rely on this guide to fix a broken dishwasher – rather, contact a professional to help you with serious issues involving electronics or plumbing.