Maytag Washer F20 Code: Causes & 4 Ways To Fix It Now

Maytag washer is one of the most famous washers in the market; however, all washers can face errors occasionally. The errors are displayed in a two-letter code that alerts you there is something wrong with your washing machine.

It can be frustrating if you don’t understand the meaning of the error code and the washer stops mid-cycle, but you don’t have to worry because, in this article, I will explain what the Maytag washer F20 code means.

In addition, I will discuss all the possible causes of the F20 error code and how to solve each one.

Causes of Maytag Washer F20 Code

The F20 error code means the washing machine is not receiving enough water to function correctly. There are a lot of causes of the F20 error code, the water supply to the washing machine being turned off, the inlet hoses being kinked, twisted, or clogged, or you need to reset the washer.

1- Water Faucets Are Not Open Completely

The washing machine is connected to two water faucets (water valves); cold and hot faucets. The faucets supply the water required for the washer to fill the tub and start the cycle. If the water faucets are turned off or not open completely, it will result in the F20 code error.

If the water faucets are opened completely, the problem may be in the water supply to your household; therefore, you will need to ensure that the water supply to your household is working.

2- Kinked or Clogged Water Inlet Hoses

The hoses connected to the faucets are the inlet hoses; they are responsible for delivering the water to the washing machine. The water will not reach the washing machine if the hoses are clogged, kinked, or twisted.

The hoses could be obstructed by something or an object stepping on them, which causes blockage of the water flow. As a result, the water reaching the washing machine will be insufficient, resulting in the F20 error code.

3- Screens of Inlet Hoses Are Clogged

Each inlet hose has a water valve; a screen protects the valve, and the screen prevents the passage of any debris into the washing machine. If the screen gets clogged, it will affect the amount of water in the washing machine.

You can surely tell that the screens are the problem if you have never cleaned them before; a clogged screen will result in the F20 error code.

4- Washer Electronic Glitch

If, after checking everything and there is nothing wrong with the inlet hoses or the water faucets, the problem may be an electronic glitch in the control board.

The control board is the most essential part of the washing machine; it sends commands to every part of the appliance; sometimes, the control board can glitch and trigger error codes like the F20 error code.

The suitable solution here is to reset the washing machine; resetting the washing machine will clear any electronic glitches. If the error persists after resetting the washer, you must hire a technician to check the control board.

How to Fix Maytag Washer F20 Code?

After discussing all the possible causes of the F20 error code, like the water supply to the washing machine being turned off or the inlet hoses being kinked, twisted, or clogged, now, I will tell you how to fix each cause.

1- How to Fix Water Faucets that Are Not Open Completely?

The washing machine is connected to two faucets; both must be open completely to ensure that they supply sufficient water for the washing machine to operate correctly.

So, you check the water faucets and open them completely. If the water faucets are opened, check your household’s water supply. If you are having problems with the water supply to your household, you will need to hire a plumber to fix the insufficient water supply.

2- How to Fix Kinked or Clogged Water Inlet Hoses?

The water inlet hoses deliver the water from the water faucets to the washing machine; if the hoses are twisted or kinked, you will need to fix them. If the hoses are irreparable, you must purchase new hoes to fix the problem.

If there is something clogging the hoses, you will need to disconnect the hoses and clean them. You can use a tall thing object and insert it in the hoses and remove whatever is clogging the hoses.

3- How to Fix Screens of Inlet Hoses Are Clogged?

The water inlet valve screens protect the washer from any debris that may get into the washer; over time, the screens get clogged; therefore, you will need to clean them. First, you must power off the water supply to the washing machine.

Then, disconnect the inlet hoses, take out the screens, and put them under running water to clean them. After cleaning the filter screens, install them back and connect the inlet hoses; the problem should now be fixed.

You can test if the error F20 is solved, power on the washer and run a wash cycle, and observe if the F20 error message appears again.

4- How to Fix Washer Electronic Glitch?

After checking all the possible causes, and none of them applies to your washer, the issue may be an electronic glitch with the control board. There are two ways to solve the electronic glitch problem; the first way is to press the Pause/Cancel button twice, the washer can start draining after this, but it’s normal and part of the resetting process.

The second way is to reset the washer by disconnecting it from the electrical outlet and letting it rest for a few minutes. These 2-3 minutes help the washing machine to get rid of any excess electrical charge. You can use the circuit breaker or the washer’s plug to disconnect the washer.

Then reconnect the washer to the electrical outlet or toggle on the circuit breaker. the F20 error code should now disappear. If the F20 code persists, it may be a problem with the control board, and unfortunately, you will need to hire a technician to check the control board.

Preventing Maytag Washer F20 Error Code

After discussing the possible causes of the Maytag washer F20 code and the solution to each cause, I will now tell you how to avoid and prevent the F20 from occurring.

1- Regular Maintenance

Regular maintenance can save any electronic or electrical appliance from errors; the maintenance makes you solve the problems before they aggravate them. Therefore, to avoid the F20 in the future, you will need to perform regular maintenance on your Maytag washer.

Regular maintenance should include checking the water faucets and ensuring they are completely open; in addition, ensure there are no problems with the water supply to your household.

The inlet hoses are essential for delivering the water to your washing machine; therefore, ensure they are not clogged, twisted, or kinked. If the inlet hose is damaged, you must replace it to ensure your washing machine receives sufficient water.

Resetting your washing machine now and then will ensure it doesn’t come across any errors or glitches; you can do this simply by powering off the machine and unplugging it for 2-3 minutes.