Maytag Washer Make Noise During Spin Cycle: 5 Ways To Fix It

If you own a Maytag washer, you know how important it is to keep it running smoothly. However, if you’ve noticed your Maytag washer making loud noise during the spin cycle, you’d agree that it can be frustrating and disruptive.

Fortunately, several easy fixes can help you address the problem and restore your washer to its quiet, efficient self.

In this blog post, we’ll examine five ways to fix your Maytag washer’s loud noise during the spin cycle so that you can enjoy a quieter laundry experience.

Why is Maytag Washer Making Loud Noise During Spin Cycle?

If your Maytag washer makes loud sounds during the spin cycle, there could be several reasons. Here are some possible causes to consider:

1. Overloading

When too much laundry is loaded into the washing machine, it can cause an unbalanced load and make the machine vibrate and bang.

The washer drum has a limited capacity and should not be overloaded because it can damage the machine and reduce its lifespan.

To prevent overloading, you can follow the recommended load sizes based on the type of washer: 80% maximum for top-loading washers and 60% maximum for front-loading washers.

2. Uneven Load Distribution

Another common reason for a noisy washing machine is uneven load distribution. When heavy items like towels or jeans are mixed with lighter clothes, it can cause the drum to spin unevenly and create a banging noise.

You can separate heavy and light items and wash them separately to prevent this. You can also distribute the laundry evenly in the drum.

3. Unbalanced Machine

If the washing machine is not level on the floor, it can cause the washer drum to spin unevenly and create a loud noise during the wash cycle.

You can check your machine is level by ensuring all four feet are firmly planted on even ground. You can adjust the feet using a wrench or pliers to make them even and steady.

4. Damaged Drum Spider Arms

Front-loading washing machines use drum spider arms to hold the basket in place. If these arms are cracked or broken, they can cause the drum to move excessively and create a banging noise.

You can check for this issue by gently moving the drum up and down while the door opens. If the drum moves excessively, it is likely that one or more drum spider arms are cracked and need to be replaced.

5. Loose Drum Screws

Screws holding the drum in place can also cause a banging noise during the spin cycle. You can check for loose screws by removing the washer’s top and back or front panel, depending on the type or model of the washer. Once you can access the drum, you can tighten loose screws using a wrench.

6. A Problem with the Drive Pulley or Belt

The belt system of the washing machine, which includes pulleys that run the drive motor and keep the drum spinning, can also cause a loud noise if there is an issue.

You can inspect the belt system by removing the washer cabinet and looking for cracks or breaks in the pulleys or belts. If there is damage, you must have it repaired or replaced by a professional.

7. Worn-out Tub Bearing

The tub bearing is the part that allows the drum to spin by keeping it on track with the help of ball bearings. If the tub bearing is worn out, it can cause a loud noise during the spin cycle. Hire a repair professional to uninstall and access the drum to replace a faulty tub bearing.

8. An issue with Shock Absorbers (front-loading washers)

Shock absorbers are parts that help keep the drum balanced and spinning evenly. If they are disconnected or worn out, they can cause a loud noise during the spin cycle.

You can open the machine’s back panel and inspect the shock absorbers to check for this issue. If there is damage, you should have them replaced by a professional.

9. Worn-out Suspension Rods (top-loading washers)

Suspension rods are attached to the top-loading washer frames using springs to keep the machine balanced while it’s running. If the suspension rods are damaged, they can cause a loud clanging noise during the spin cycle.

You can inspect the rods by checking your owner’s manual to see where and how to access them. If there is damage, you can contact a professional to replace them.

By identifying the cause of the loud noise in your Maytag washer during the spin cycle, you can take the required steps to fix it and prevent further damage. However, if you’re uncomfortable troubleshooting the problem, contacting a professional for your washer repair is always best.

How to Fix Maytag Washer Making Loud Noise During Spin Cycle

A Maytag washer making loud noise during the spin cycle can be a sign of a few different issues. Here are some steps you can attempt to fix the problem:

1. Level the Washer

If your Maytag washing machine makes a loud noise during the spin cycle, it may be due to an unbalanced load.

To fix this, you’ll need to ensure the washer is level. You can quickly adjust the legs at the washer’s bottom.

First, unplug the washer and use a bubble level to check the washer’s level. If it’s not level, adjust the legs until it is. Once the washer is level, try running a spin cycle to see if the noise has stopped.

2. Check for Worn or Damaged belts.

If your Maytag washing machine makes a loud noise on the spin cycle, it may be due to worn or damaged belts. To fix this, you’ll need to inspect the belts for signs of wear or damage. Look for cracks, frayed edges, or signs of excessive wear.

If you find any damage, you’ll have to replace the belts. To replace the belts, you’ll need to be able to access the washer’s back and remove the old belts. Install the new belts in their place and test the washer to see if the noise has stopped.

3. Replace the Drive pulley.

If your Maytag washing machine makes a loud noise during the spin cycle, it may be due to a damaged or worn drive pulley. To fix a damaged drive pulley, you’ll need to replace the drive pulley. This is located underneath the drive motor at the bottom of the washer.

To replace the drive pulley, you’ll need to access the bottom of the washer by removing the front panel. Once you have access to the drive pulley, remove the old drive pulley and install the new one. After installing the new drive pulley, test the washing machine to see if the noise has stopped.

4. Replace the Transmission

If your Maytag washing machine makes a loud noise during the spin cycle, it may be due to a faulty transmission. To fix a faulty transmission, you’ll need to replace the transmission.

This is a complex repair and may require the help of a professional. If you’re comfortable with DIY repairs, you’ll have to access the back of the washing machine and remove the transmission. Install the new transmission in its place and test the washer to see if the noise has stopped.

5. Replace the Drum bearings.

If your Maytag washing machine makes a loud noise during the spin cycle, it may be due to worn or damaged drum bearings. To fix damaged drum bearings, you’ll need to replace the drum bearings.

This is yet another complex repair that may require the help of a professional. If you’re comfortable with DIY repairs, you’ll need to access the back of the washing machine and remove the drum. Remove the old bearings and install the new ones. Reassemble the washer and test it to see if the noise has stopped.

Overall, fixing a Maytag washer that’s making a loud noise during the spin cycle can be a straightforward process that involves checking for loose or worn parts and either tightening, lubricating, or replacing them.

If you are unsure about these steps or feel uncomfortable working on your washer, it’s always best to call a professional.