7 Most Common Electrolux Front Load Washer Problems

Electrolux front-load washers are popular appliances among homeowners for their reliability and efficiency in getting your dirty clothing nice and clean. However, even the best appliances can sometimes experience issues; when this happens, you must be prepared.

When you know what problems you might face, you’ll be better equipped to jump into action the moment you notice something going wrong with your appliance.

A few different things might go wrong when you own one of these washers, but you’ll be happy to know that troubleshooting is easy, and you’ll soon be able to figure out what the problem is and how you can solve it.

Keep reading to discover the 9 problems you might experience and how to get them sorted out.

The 7 Most Common Problems With an Electrolux Front Load Washer

Here’s what you need to know about your Electrolux front-load washer:

1. The Washer Won’t Spin

A washer that won’t spin can be frustrating. Spinning is a crucial function of the appliance to get your clothes clean, and a spin cycle at the end of a wash is needed to remove as much water from the clothes as possible.

When your washer doesn’t spin, you might simply have inserted an unbalanced load. However, it might also be caused by a faulty motor, an issue with the lid switch assembly, or even a defective door latch. This is because a malfunctioning door latch might disrupt your appliance mid-cycle.

You can test these theories by, first of all, ensuring that your load is balanced before starting a wash cycle. If there’s nothing wrong with the load you’ve inserted, start examining different components of your washer.

  • Check the motor for damage or assess whether it’s a little unstable. This might indicate an issue; you’ll need to call appliance repair technicians to assist.
  • Check the lid switch assembly. If you have one, you’ll need to use a multimeter tool to check for continuity on this part; otherwise, call for professional assistance.
  • Finally, check the latch on your door to ensure everything is in place. You might need to repair or replace the part if there is damage or if it’s loose.

2. The Washer Won’t Drain

A draining issue with your washing machine usually indicates that your drain pump or drain pump filter is clogged. The pump is used to push the water out of the appliance, so if it’s blocked, it will cause issues with the drainage, as water will not be able to pass through it.

Another component that might be blocked is the drain hosesmall items or debris might get stuck inside the pump and cause a blockage.

If you suspect a drainage issue, clean the drain pump and dislodge any obstructions. While cleaning, check for any signs of damage and replace it if necessary.

Next, clean out the drain hose and remove anything blocking the drainage pipe. This should solve any drainage problems you have, but if not, then it might be time to call for professional assistance.

3. The Washer Won’t Start

If your appliance doesn’t start at all, this usually indicates one of two problems: an issue with the washing machine timer or a faulty main control board.

The control board acts as the brain of the appliance and transfers messages to various components of the washer to make it operate. If there is a fault with the control board, it might not be communicating with the rest of the machine in order to get the cycle started.

On the other hand, the washing machine timer is responsible for various functions of the machine, including cycle selection, water intake, etc. It consists of a mechanical or electronic mechanism, and if it has a fault, your washer might not start.

If your washer isn’t starting, first make sure that you have a secure power supply. If there is power connected to the machine, but it still won’t start, you’ll need to check both of these components and possibly have them replaced.

4. The Washer Won’t Fill

The water inlet valves are responsible for the water supply to your washer, and if the machine isn’t filling up, there is most likely an issue with this component. It’s crucial that you check your water pressure before jumping to conclusions because the water inlet valve requires adequate pressure to work correctly.

However, if your water pressure seems fine, but there’s still an issue with your water level, you’ll need to investigate further.

  • Start by checking the water inlet hose and ensuring that it’s securely connected to both the cold and hot water taps and that the taps are turned on.
  • Check the water inlet valve itself and assess it for visible damage. If you notice an issue, it might need to be evaluated by a technician.
  • You can also check the water sensors to ensure they detect the correct water level in the tub.
  • Finally, check the pressure sensor to ensure the machine can accurately measure the water pressure and allow the inlet valve to function.

5. The Washer Keeps Leaking

A leaking washer can be one of the most frustrating things to deal with. Not only does it prevent you from washing your clothes, but it makes a terrible mess that you have to keep cleaning up.

There are several possible causes of a leaky front-loading washer, including an unlevel unit, faulty connections, a damaged pump, a loose clamp, or a faulty door. The first thing you need to do is check whether your washer is level by using a spirit level and adjusting the legs of the appliance until the unit is stable on the ground.

Once you’ve done this, move on to the hose connection and ascertain that everything is securely connected. If not, tighten the connections and check the pipes for any damage.

Next, assess the water pump, which might be malfunctioning; you’ll be able to determine this as the cause of the problem if your appliance rumbles or shakes during a wash cycle. Check the pump at the bottom of the appliance and ensure it is in good condition.

Finally, look at the door seal and hinges on your washer, as the leak might be coming from there. Check all the screws and the rubber gasket that acts as the seal.

6. The Washer Vibrates or Shakes

Usually, a shaking or vibrating washer is a simple problem that can be easily rectified. It usually relates to the load or the unit itself being unbalanced.

First, ensure that you’re running an even load; do not overload your washer, and avoid combining heavy items like towels or denim with lighter garments, as this can create an imbalance. Rather keep heavier items together and smaller, lighter items together, and wash all your towels and linen in the same load.

The next thing you can check is that your washer is level on the ground; if you place your hand on one corner and press down, it should not move. If it moves, the appliance is not level, which is most likely causing it to shake and vibrate during a cycle; you can also check this using a spirit level.

You will need to adjust the legs of the unit until it sits level and stable on the ground. If you’re struggling, keep in mind that the appliance might be placed on uneven ground; ensure that it’s on a completely flat surface.

7. The Washer Makes Excessive Noise

A washer that shakes and vibrates a lot often makes excessive noise too. If you hear a lot of noise coming from your appliance, combined with vigorous movement, you’re probably dealing with an imbalance issue, as discussed above.

Check your load balancing and whether your unit is level. However, your appliance might make strange or excessive noise for other reasons.

If you hear a whirring sound, you might be dealing with a motor issue; examine the motor to assess it for damage. If you see something wrong, it may need to be replaced.

However, if there is no damage, check that the drive belt is properly connected and tightened to the motor. If you hear a thumping sound, then your drum might be loose, and you’ll need to assess the connection.

Electrolux Front Load Washer Problems: Are They a Dealbreaker?

All washers have pros and cons, but these possible issues are not faults that you need to worry about and shouldn’t be considered a dealbreaker if you’re considering buying an Electrolux front loader.

With a bit of troubleshooting and the assistance of a professional, you’ll easily be able to diagnose and repair any problems you happen to run into. Simply use this article as a reference the next time you notice anything amiss with your washer, and you’ll easily be able to have the problem solved.

Remember to be cautious when troubleshooting or attempting any repairs yourself, and call for help if you feel uncertain.

5/5 - (5 votes)
DMCA.com Protection Status
error: Content is protected !!