Amana Washer Not Spinning: 11 Easy Ways To Fix It Now

It can be frustrating and inconvenient if you’ve noticed that your Amana washer isn’t spinning as it should or displaying error codes.

There are various reasons why your washer may be experiencing this issue; thankfully, many of them can be easily fixed.

This article will explore 11 ways to fix Amana washing machines not spinning.

The solutions or answers in this troubleshooting range from easy troubleshooting steps to more complex repairs—so that you may discover the best answer to your difficulty.

Following these instructions, you can swiftly restore your Amana washer’s wash cycle to peak performance and resume your regular laundry schedule (keeping your clothes clean).

Why is your Amana Washer Not Spinning?

If your Amana washer isn’t spinning, several possible causes could exist.

Here are some of the most common reasons why your Amana washer’s spin cycles:

1. Lid Switch Assembly

The Amana washer door/lid switch or assembly ensures the lid is securely closed before the washing machine begins a cycle. If the faulty lid switch (lock switch), the washer may not spin.

Using a multimeter, you can check the Amana washing machine lid switch assembly for continuity. And if, after checking the lid switch or lid latch in your washer, you discover that it’s faulty or damaged, then you’ll have to replace the lid latch.

2. Drive Belt

The Amana washing machine drive belt links the motor to the drum and transfers power to cause the drum to spin. If you have a broken belt, or it is worn or cracked, the washer may not spin.

You can check a broken or worn-out drive belt by visually inspecting it for any signs of damage or wear. You may need to replace the drive belt if you find any issues.

3. Motor Coupling

The motor coupling in load washers is used to connect the motor to the transmission, and it’s also responsible for transferring power from the motor to the transmission. If the motor coupling is broken, the washer may not spin.

You may evaluate the machine’s motor coupling parts for evidence of damage or wear by visually scrutinizing them. If you discover any problems, the motor connection may need to be replaced.

4. Clutch Assembly

The clutch assembly engages and disengages the transmission to the drum. If the clutch assembly is worn or damaged, the washing machine may not spin.

You can examine the clutch assembly for evidence of damage or wear by visually scrutinizing it. If you discover any problems, the clutch assembly may need to be replaced.

5. Transmission

The transmission is in charge of transmitting power from the engine to the drum. If the gearbox fails, the washing machine may stop mid – cycle or not spin.

While the washer is running, listen for any strange sounds or sensations. If you detect any problems, you may need to replace the transmission.

6. Motor

The motor provides power to the transmission and drum. If the motor is faulty, the washer may not spin.

You may test the machine’s drive motor parts using a multimeter to verify whether they still work properly.

If, after checking the motor, it turns out to be faulty, you’ll have to replace it.

7. Control Board

The control board handles the load washer’s numerous tasks, including the spin cycle. If the control board is faulty, the washer may not spin.

You can check the Amana washing machine control board in your dryer to see if it still functions as it’s supposed to use a multimeter.

If, after checking the Amana washing machine control board, it turns out to be faulty, you’ll have to replace it.

8. Capacitor

When the load washer starts, the capacitor provides a power boost to the motor. If the capacitor is faulty, the washer may not spin.

You can check the capacitor in your dryer to see if it still functions as it’s supposed to use a multimeter.

If, after checking the capacitor and it turns out to be faulty, then you’ll have to replace the capacitor.

9. Drive Motor Brushes

The drive motor brushes are responsible for providing power to the motor. If the brushes are worn or damaged, the washer may not spin.

You can check the drive motor brushes by visually inspecting them for any signs of wear or damage. If you discover any problems, the drive motor brushes may need to be replaced.

10. Tub Bearing

The washer tub bearing supports the drum and allows it to spin. If the tub bearing is worn or damaged, the washer may not spin.

You can check the tub bearing by listening for unusual sounds or vibrations while the washer operates. If you detect any problems, the tub bearing may need to be replaced.

11. Suspension Rods/Springs

Your Amana washer’s suspension rods or springs balance the tub throughout the wash cycle. If these rods or springs become damaged, the tub may become unbalanced, causing it not to spin properly.

If you suspect that its suspension rod parts or springs are damaged, you must have them replaced.

How to Fix an Amana Washer Not Spinning

You may do various things to fix your Amana washer if it is not spinning.

Here are some critical steps you can take to fix it:

1. Check the Power supply

Before you worry, ensure your Amana washer power cable is correctly hooked to the power source and the circuit breaker has not tripped.

You may also check other electrical items in your house for electrical faults. This may help you determine whether or not there is a power outage.

2. Check the Lid switch.

The lid lock switch or lid latch is a safety feature in the Amana washer that prevents the washer from spinning whenever the lid is open. So, if the lid switch or lid latch mechanism is faulty, the washer cannot tell if the lid is available, so the washer may not spin.

To check a defective lid switch, open the lid and press the button using a small object or pen. If you do this, it is supposed to produce a clicking sound; if it doesn’t, you may have to replace the lid latch or switch.

3. Check the Drive belt.

The washer drive belt connects the motor to the transmission and helps the washer spin. If the belt is broken or loose, the washer may not spin.

Unplug the washer and remove the rear panel to inspect the drive belt. Examine the belt for signs of wear or damage and repair or replace it—If the belt is loose, tighten it; if it is damaged, replace it.

4. Check the Motor coupler.

The motor coupler connects the motor to the transmission and helps the washer spin. If the coupler is broken, the washer may not spin.

To check the condition of the motor coupler, unplug the washer and remove the cabinet. Examine the coupler for evidence of damage or wear. If the motor coupler is broken, then fix or replace it.

5. Check the Clutch Assembly

The clutch assembly helps the washer spin by engaging the transmission. The washer may not spin if the clutch is worn out or broken.

To check the clutch assembly, unplug the washer and remove the cabinet. Look for any signs of damage or wear on the clutch. If the clutch is worn out or damaged, fix or replace it.

6. Check the Transmission

The washer transmission helps the washer spin by shifting the gears. If the washer transmission is faulty, the washer may not spin.

To check the transmission, unplug the washer and remove the cabinet. Afterward, examine the transmission for any signs of damage or wear. If the transmission is faulty, replace it.

7. Check the Motor

The motor is responsible for spinning the washing machine’s drum. If the motor is faulty, the washer may not spin.

To check the motor, unplug the washer and remove the cabinet. Examine the engine for any evidence of damage or wear. If the motor is damaged or faulty, then fix or replace it.

8. Check the Suspension rods/springs.

The suspension rods/springs help stabilize the drum during the spin cycle. If they are worn or damaged, the washer may not spin.

Unplug the washer and remove the cabinet to inspect the suspension rods/springs. Examine the rods/springs for evidence of damage or wear. If they are worn out or broken, repair or replace them.

9. Check the Pump

The drain pump removes water from the washing drum during the spin cycle. The washer may not spin if the pump fails or the filter is clogged.

Unplug the washer and remove the cabinet to inspect the pump. Examine the pump for evidence of damage or wear. If the pump is broken or damaged, repair or replace it.

10. Check the Timer/Control board.

The timer/control board controls the different cycles of the washer. If it’s faulty, the washer may not spin.

To check the timer/control board, unplug the washer and remove the control panel. Look for any signs of damage or wear on the board. If it’s faulty, replace it.

11. Check the Wiring

If the wiring in your Amana dishwasher becomes faulty or loose, it can stop your washer from spinning.

In such cases, the first step is to unplug the Amana washer and inspect the wiring for apparent signs of damage, such as frayed wires or weak connections. You must repair or replace the wire if you find damage anywhere on the wiring.

To fix a wiring problem in your Amana washer, you’ll have to call a professional technician, especially when you are not experienced with electrical work. The electrician will help you diagnose the problem, perform the necessary repairs, and ensure the wiring is connected correctly.

In summary, fixing Amana washing machines that are not spinning requires a thorough diagnosis. By checking the various components listed above and carrying out the recommended fixes, you can restore the washer to its optimal functionality.

Finally, if you are uncomfortable doing the repairs yourself, you should hire an appliance technician.